Shulou(Shulou.com)06/01 Report--

[if you have any questions in the experiment, please follow the official Wechat account "IT backyard" and leave me a message, and I will take the time to answer your questions.)

Huawei Wireless-AC+AP small Wireless Network configuration Lab _ v1

Network structure diagram:

Step 1: configure network connectivity

SW:

Interface Vlanif100

Ip address 192.168.0.1 255.255.255.0

Interface GigabitEthernet0/0/1

Port link-type trunk

Port trunk pvid vlan 100

Port trunk allow-pass vlan 2 to 4094

Interface GigabitEthernet0/0/2

Port link-type trunk

Port trunk pvid vlan 100

Port trunk allow-pass vlan 2 to 4094

Finally achieve the goal and explanation:

The interface between the switch G0swap 2 and the GAccord 0Compact 1 is connected through the Vlan100, in order to communicate between AP and AC.

AC:

Interface Vlanif100

Ip address 192.168.0.2 255.255.255.0

Dhcp select interface

Interface GigabitEthernet0/0/1

Port link-type trunk

Port trunk pvid vlan 100

Port trunk allow-pass vlan 2 to 4094

Finally achieve the goal and explanation:

In order to communicate between the AP and the AC, the interface of AC is connected with the interface of the switch through Vlan100.

The Vlan100 interface is used as the DHCP for managing the network. Note that the interface between AC and AP should be marked with pvid vlan 100.

Step 2: configure AP to go online to AC

AC:

Wlan ac-global country-code cn (default)

Wlan ac-global carrier id other ac id 1

Wlan

Wlan ac source interface vlanif100

Ap-region id 10

Ap-region-name test

Ap-auth-mode mac-auth (default)

Ap id 0 type-id 19 mac 00e0-fc2c-72f0

Ap-sysname test-1

Region-id 10

Finally achieve the goal and explanation:

Under the Wlan view, specify the Vlan100 interface of AC as the AP online communication interface, and create an AP group ID of 10, named test.

Add AP by manual mac, type-id 19 is the ID number corresponding to the AP model, and AP is named test-1 and join the corresponding group.

Step 3: send out the Wifi signal

Interface Vlanif101

Ip address 192.168.101.1 255.255.255.0

Dhcp select interface

Interface Wlan-Ess1

Port hybrid pvid vlan 101

Port hybrid untagged vlan 101

Finally achieve the goal and explanation:

Provide a DHCP service for wireless users and use Vlan101 interface to do DHCP.

Create a virtual layer 2 interface Ess1, which is similar to the ordinary physical layer 2 interface.

Wlan

Wmm-profile name wmm id 1

Radio-profile name radio id 1

Wmm-profile id 1

Finally achieve the goal and explanation:

Wmm is equivalent to Qos, which is mainly used for quality control and needs to be tied to the RF template.

Create a RF template, which is called by a RF, and the RF inherits the parameters on the template.

Traffic-profile name traffic id 1

Security-profile name security id 1

Finally achieve the goal and explanation:

Create a traffic pattern and a security template without configuring parameters, but must be created and added to the service set.

Wlan

Service-set name test id 1

Forward-mode tunnel

Ssid test-xcw

Wlan-ess 1

Service-vlan 101

Traffic-profile id 1

Security-profile id 1

Finally achieve the goal and explanation:

Create a set of services for RF calls that integrate the various templates you just created.

Ap 0 radio 0

Radio-profile id 1

Service-set id 1 wlan 1

Finally achieve the goal and explanation:

Invoke the RF template and service set on the 0mm 2.4G radio frequency on AP 0.

Commit ap 0

Finally achieve the goal and explanation:

Finally, the Wifi signal will be emitted only when the configuration of AP is submitted in the Wlan view.

Step 4: let users access the Internet

Network structure diagram:

Because the wireless user obtains the IP address through the DHCP of the Vlan101 interface on AC, the gateway is the address of Vlan101 (192.168.101.1). Since routing is needed to access other network segments, it is recommended to use the dynamic routing protocol OSPF.

Establish an OSPF-AREA between AR, SW and AC, and publish the relevant network segments. This article does not do OSPF research, if you need to understand the knowledge of OSPF configuration, there will be related articles.

-- END

Reprint is allowed, but you must indicate the link between the publication office and the original text, otherwise its legal liability will be investigated. Thank you for your cooperation!

(original blog: https://blog.51cto.com/11179786)

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.