In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-04-19 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >
Share
Shulou(Shulou.com)06/02 Report--
Preface
Centos8 has been released, I wanted to try and install it to the company server, but I found that I couldn't recognize the hard drive! After searching, it was found that redhat took the initiative to delete the driver.
The link to the discussion is as follows
Removal of SAS-2 controller drivers in RHEL 8
Preparatory work
This tutorial is only for DellR620,R720. At the same time, the raid model is LSI2008,LSI2108.
1. View the server raid information lspci-nn | grep LSI02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] [1000nn] (rev 03)
Check to see if the hardware ID is in the list removed by Redhat
Remove list
You can see that the Raid driver has been removed from the source code, and other hardware drivers can also be seen in this table.
two。 Download the raid driver
Thanks to the elrepo team, they extracted the raid driver and packaged it out for everyone to use.
The driver links are as follows:
Https://elrepo.org/linux/dud/el8/x86_64/
Find the appropriate raid driver according to your raid model.
Because the previous raid message is MegaRAID SAS, use dd-megaraid_sas-07.707.50.00-1.el8_0.elrepo.iso
2.1 make a boot disk or USB disk
You can make the downloaded iso into CD or copy it to a U disk. Then burn the image of centos8 to DVD or USB disk. How to use it, see if your server has a CD-ROM drive.
Note: U disk format must be fat32
3. Install the system and load the driver 3.1 start the installation using centos8's installation media
Type Tab into the boot menu in the installation start interface, and type "inst.dd" on the command line before continuing.
Insert a new U disk with megaraid's iso, select the corresponding dud driver, and install it
3.4 if all goes well, press C to continue and you will enter the system installation.
Enter the normal installation interface and check the hard drive at this time to find that it has been identified.
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.