Shulou(Shulou.com)05/31 Report--

Audio commentary

Hello, everyone. The meeting will answer your questions. Many people still don't know when 200g mobile traffic is deactivated and how to restore it when 200g is disabled. Now let's take a look at it.

Answer:

1. The traffic used by the directional traffic package is calculated by the customer's 200GB in the current month, and automatically recovers the following month after capping. According to the query of mobile phone customer service, a mobile phone card can only use 200g a month. After capping, it cannot be unsealed this month and will be unsealed automatically next month. Take Unicom Tencent King Card as an example. When the total traffic reaches 40GB in the month, the traffic feature will be turned off and will be enabled automatically next month. When the total traffic of Tencent King Card reaches 40GB in the current month, you can release the traffic through electronic channels.

2. How is the traffic calculated:

3. According to the test section and its speed test results, the commonly used methods are graphic method, analytical method and velocity isoline method. The graphic method and velocity isoline method are only suitable for multi-line and multi-point flow measurement data, while the analytical method is suitable for all kinds of flow measurement data and is widely used. According to the relevant formulas of the analysis method, the discharge is calculated by calculating the average discharge on the vertical line, calculating the local area (average discharge and discharge), calculating the cross-section area, cross-section discharge and cross-section average discharge, and calculating the corresponding water level to calculate the discharge. It is mainly shown in that the cost is lower than the traditional cost when the consumption is large, and how to choose the communication mode according to one's own needs. IP header length is 20 bytes, TCP header length is also 20 bytes, a total of 40 bytes / slice, protocol reply 40 bytes / packet terminal upload location, alarm and other information: the average is 70 40 40 '150 bytes / piece terminal upload operation data, the average is 110 40 40 40' 190 bytes / piece terminal reply scrambling information, the average is 72 40 40 40 '152 bytes / piece. Average 72 40 40 40 '152 bytes / message sent by the center, 100 40 40' 180 bytes / detailed scheduling information sent by the center, 120 40 40 200 bytes / message.

This is the end of this article. I hope it will be helpful to all of you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.