Shulou(Shulou.com)05/31 Report--

This article mainly explains "how to use gps timing master clock", the explanation content in the article is simple and clear, easy to learn and understand, please follow the small series of ideas slowly in-depth, together to study and learn "how to use gps timing master clock" bar!

GPS timing master clock adopts advanced multi-mode satellite receiver, and the timing signal is easy to receive: large coverage, no communication blind area, GPS satellite, Beidou satellite, multi-source central master clock combined with multiple time references, adaptive filtering technology and internal heartbeat detection and other core technologies, realizing automatic switching and timing fusion of multiple time sources, with higher safety and reliability.

After power-on to God, enter the working operation state, the original start-up screen of the front panel LCD.

SYN2136 Beidou NTP Network Time Server

After the GPS calibration master clock is turned on, the default reference source is Beidou +GPS mode, and the self-travel time is displayed.

Installation and commissioning process:

1. Connect the installed antenna to the antenna/ANT interface of the clock server, observe the front panel, and after receiving the satellite, connect the network cable to the clock server and connect it directly to the computer/local area network. Log in to the management interface of the equipment through software or WEB for configuration.

2. Change the default IP and gateway in the server to IP and gateway that are a segment of the current local area network.

3. Click on the time in the lower right corner of the computer, select "Internet Time"-change settings, select "Internet Time Server Synchronization" in the input box to modify the default "time.windows.com" to the modified IP of the clock server, and click "Update Now."

4. After clicking the "Update Now" box at the back, the prompt indicates that the synchronization is successful, which means that the synchronization is successful. If the prompt indicates that the synchronization is wrong, it means that the synchronization fails, and it is necessary to check whether the IP is correct and whether the network is smooth.

5. After checking the IP and network lines, you need to check whether the Windows time function of the computer is enabled. In addition, check whether the NTP client function is enabled. Fill in the IP of the clock server in the NTP configuration, and then click "Update Now."

6, because the antenna should be erected on the outdoor roof/window side/terrace/balcony and other places, it is necessary to pay attention to 1, lightning protection, the mushroom head of the antenna needs to be erected on the roof/roof, it is inevitable to encounter lightning strikes, under normal circumstances, the use of lightning arresters can be avoided, lightning arresters connected between the host and the antenna, the interface mode is BNC.

the gps timing master clock networking mode can also provide standard time information for a local area network formed by intelligent weak current systems such as a monitoring system, a computer network, a timing scoring system and the like, unify the time of all systems, and once any fault or accident occurs, the unified time can be checked according to the unified time.

Thank you for reading, the above is "how to use gps master clock" content, after the study of this article, I believe we have a deeper understanding of how to use gps master clock this problem, the specific use of the situation also needs to be verified by practice. Here is, Xiaobian will push more articles related to knowledge points for everyone, welcome to pay attention!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.