In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-01-16 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >
Share
Shulou(Shulou.com)05/31 Report--
This article mainly explains "Micropython firmware how to use Pico to swipe firmware and configure VsCode development environment", interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Let's let the editor take you to learn how to use Pico to brush firmware and configure VsCode development environment for Micropython firmware.
MicroPython is a streamlined and efficient implementation of the Python 3 language, including a small portion of the Python standard library, optimized to run in microcontrollers and restricted environments. MicroPython is already supported by ESP8266/ESP32 in the WiFi module.
Pico pin diagram
First, burn Micropython firmware for Pico. Prepare / download firmware
Download link: firmware download
The MicroPython firmware is: pico_micropython_20210121.uf2 file.
two。 Burn firmware
Be sure to operate in order! Otherwise, the recording will fail!
(1) always hold down the BOOTSEL button on the raspberry pie Pico board to connect the raspberry pie Pico to the computer through the Micro USB cable; (note: the Micro USB cable must be your own serial cable! If the line used is not a serial port line, there will be problems such as unrecognizable! )
(2) drag the prepared firmware pico_micropython_20210121.uf2 file into the U disk that pops up after it is inserted into the Pico.
At this point, the board will restart automatically, and then it can be tested by using serial port software such as Putty:
If it is black at first, Ctrl+D can restart it.
Configure the VsCode development environment
I have always used vscode for micropython development, so I recommend it to you ~ very convenient, and you can enjoy using the Vscode editor! It must be much easier to use than all kinds of Micropython official recommended code editors!
At this point, I believe you have a deeper understanding of "Micropython firmware how to use Pico to swipe firmware and configure VsCode development environment". You might as well do it in practice. Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.