Shulou(Shulou.com)06/01 Report--

This article will explain in detail the solution to change the disk partition format into RAW format in the computer. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

Question 1: my computer is equipped with double hard drives, of which the main disk 80g is divided into four zones (NTFS), and the secondary disk Seagate 40G is divided into one zone (NTFS). Recently, the format of the secondary disk has suddenly become RAW, which can not be accessed to the hard disk, because the data inside is more important, so I do not intend to format it. Please advise us how to restore the format of the hard disk without damaging the data inside. Thanks in advance!

Question 2: WINXP HOME 1, which was reinstalled yesterday, somehow went wrong as soon as the removable hard drive was plugged in.

60g removable hard disk file system becomes RAW format! Prompt me to format as soon as I click, there is very important data in it. Please

Ask all the experts if they can be saved? Thank you so much!

Question 3: my USB disk has become RAW format, can not solve the XP display format is RAW, free space and used space are 0, the disk management display status is not available, I do not know why, I hope you give me a hand, little brother

Bowed to the bosses.

The above problems are all caused by the partition format change to RAW for some reason, and there may be many specific reasons.

There are several ways to solve the problem, which can be summed up. Friends who encounter this problem will solve it according to the situation.

Schemes 1 and 2 are only valid for the original system in NTFS format. Win2K and WinXP users can try. Attention please!

Solution 1: problem with system permissions 1 (the original system is a problem with NTFS format)

Right-click on the RAW drive letter, select "Properties", and then select "Security" to delete useless users, add their own user names, and then change the permissions. If there is no security option, in the folder options (open "my computer"-choose "tools" menu-select "folder" option), remove the check before "use simple file sharing", you can right-click in the NTFS format and display the security options in the properties menu.

Solution 2: problem with system permissions 2 (the original system is a problem with NTFS format)

Go to the Control Panel to find the Administrative tools, open it, open the Local Security Policy, open the Security options, change the "Guest only" to "Classic" after "Network access: sharing and Security Mode for Local accounts" in the right window, exit and return to my computer, right-click the "Security" tab on the disk that has become RAW, and delete its garbled code. Then add the user of this computer.

Solution 3: the way to modify the drive letter

Change the drive letter of RAW. If C, D, E, and F are RAW drive letters, change F to E, and you can restore it.

Solution 4: using EasyRecovery software

Using EasyRecovery software, click the second button "Data Recovery" on the left side of the software to enter. Then click the first "Advanced Recovery" in the right border, and then you will see that all the disks of your computer are listed on the left side of the software, select the disk that cannot be used, and then click "NEXT" all the way, the computer will analyze the data that exists in your disk, right-click on the RAW format character, select properties, select security, delete useless users, add your own user name, and then change the permissions. If there are no security options, you can uncheck the box before "use simple file sharing" in the folder options (open my computer, select tools menu, and then select folder options), you can right-click in the NTFS format and display the security options in the properties menu.

Second, enter the "Control Panel" to find the "Administrative tools", open it, open the "Local Security Policy", open the "Security options", in the right window to find "Network access: local account sharing and Security Mode" after the "Guest only" to "Classic", exit back to my computer, right-click on disk D to find the "Security" label, delete its garbled code, and then add users of this computer.

Using EasyRecovery Pro 6.06, select the data recovery Advanced Recovery (select the advanced option to customize the data recovery function).

2. Select the drive letter that has been changed to RAW format, and click the advanced options in the lower corner.

3. In the file system scan, select "NTFS" for the file system, click Advanced scan, select "Advanced options" in the lower right corner, and set the cluster size and data starting position to 0.

4. Click the partition setting and use the MFT mode (this must not be wrong), and then make sure

5. Click next, start scanning the file system, and then wait. It will take a long time and be patient. After completion, you will find that you have found a NTFS drive letter, and then click on the drive letter found to start scanning.

6. after the scan is completed, you will find that all the files have been found, then click restore, and select an available disk to save the recovered files.

7. Finally, format the disk with the problem and copy the recovered files back to OK. Everything is as good as before.

The first and second methods are recommended, and the third method is used when the first and second methods fail.

Method 4:

I accidentally found a tool PTEDIT32.EXE (partition table editor) attached to Norton PartitionMagic 8.0. I tried it casually. After opening it, I found the corresponding partition information. Compared with other partition information, I found that it was very different. At this time, the information of the wrong partition was modified according to the information of other partitions. (each person's hard disk partition situation is different, so there is no standard parameter), and the operation can be resumed. So don't worry, it won't damage the data, save it after modification, and it's done after reboot!

Method 5:

First cp ~ / .bash_history ~ / cmd_history back up the commands you typed, and then find out in cmd_history what commands you used.

If you just change the file system flag, use the fdisk-> t command to change it back to the original file system flag.

On the "computer disk partition format into RAW format solution" this article is shared here, I hope the above content can be of some help to you, so that you can learn more knowledge, if you think the article is good, please share it out for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.