Shulou(Shulou.com)06/03 Report--

First, the experimental environment:

1. GNS3-1.3.10-all-in-one, VMware14, SecureCRT 8.0

Second, the experimental objectives:

1. Realize the interconnection and interworking of VPC connection switch.

2. Realize the interconnection and interworking of the switch in VMware14 connection GNS3.

Third, the experimental steps of the interconnection and interworking of the VPC connection switch:

1. Open GNS3 and drag a router to the workspace

2. Right-click the icon and click Change hostname

3. Change the name of the router to SW, the abbreviation of the switch

4. Right-click the icon and click Change symbol

5. Replace the icon with the switch icon

6. Right-click the switch icon to open Conflgure

7. Click SW and select Slots, and then select NM-16ESW with the drop-down arrow

8. Click the computer icon and drag two VPC to the work area

9. Click on the network cable icon

10. Click PC1 to display the network card interface Ethernet0, and select this interface to connect to SW.

11. Connect the FastEthernet1/0-1 Universe 15 interface of SW

12. PC2 is also connected to SW, and when connected, open the startup button to turn on all devices.

Double-click the switch to enter the configuration interface

14. Enter conf t to enter global mode

15. Type no ip routing to turn off the routing function, so it will become a switch completely

Double-click the PC1 icon to enter the configuration, enter the ip+IP address + subnet mask and enter enter

16. Configure PC2 similarly

17. Enter the ping+PC2 IP address with PC1 to verify the interconnection between PC1 and PC2.

18. You can also use SecureCRT 8.0 remote terminal to verify the effect of the experiment. Open the preference settings in GNS3 first.

Click to select the console application option, select the SecureCRT option, and then click Set to update the application path.

Open and run SecureCRT, then go back to GNS3 and double-click PC1 and PC2 to call up the SecureCRT terminal program

21. Enter the IP address of ping+PC2 in the PC1 interface, and you can see the feedback from the owner PC2.

4. The experimental steps of the interconnection and interworking of the switch in VMware14 connection GNS3:

1. Open VMware and select the network connection mode of No. 1 machine to the custom VMnet1 (host mode only)

2. Select the network connection of No. 2 machine to the custom Vmnet2 (host mode only)

3. Right-click the Network Open property and select change Adapter Settings.

4. Right-click the network card to open its properties

5. Double-click the Internet protocol to enter the configuration and set the IP address and subnet mask

6. Configure the IP address of Unit 2.

7. Click the stop button to shut down the experimental equipment, select the device in the diagram and right-click to delete it.

8. Drag two Host to the work area

9. Click the network cable to connect the VMnet1 interface of Host1 to SW:

10. Connect the interface of Host1 to the interface of SW.

11. Connect the VMnet2 interface of Host2 to SW

12. Connect the interface of Host2 with the interface of SW.

13. Click the start button to turn on all devices

14. Select the connection line of No. 2 machine and right-click to open Start capture to turn on the bag grabbing function.

15. Turn off the firewall of all virtual machines, and user 1 opens a command prompt

16. Enter the IP address of ping+ No.2 in the command prompt +-t, and long ping No.2, you can see that they are interconnected.

17. Packets captured by packet grabbing function

So far, both experiments have been completed successfully.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.