Shulou(Shulou.com)06/03 Report--

The most reliable installation and activation method for upgrading notebook computer Win10

Introduction: first use the activated WIN7SP1 or WIN8.1 to upgrade WIN10 Professional Edition, after the upgrade, WIN10 will be permanently activated. This is the first one-year "inclusive" free upgrade policy proposed by Microsoft in 2015. In fact, the activation server has not been shut down so far, and officials say this favorable policy will be terminated on December 31, 2017. If you support the genuine version, you can spend hundreds to more than 1,000 yuan to buy the corresponding legitimate software media directly from the Microsoft App Store. As win fans, DIY both like to fiddle with the operating system, and do not want to miss Microsoft's "inclusive" free upgrade policy, so share with you the reliable free upgrade genuine activation experience.

Key points: [official original iso image file setup.exe genuine activation] first load the iso image file to upgrade and install directly or install it into a win7/10 dual system with the official Windows easy-to-rise update upgrade and then check whether the win10 genuine activation is successful (if successful is permanent activation with a digital license)? After successful activation, you do not want to use a dual system to format a new clean installation of genuine activation, as long as you can upgrade to a computer activated by win7/8.1 and win10 on the "activated" win7/8.1 system, each update win10 version upgrade will be automatically activated by the Microsoft activation server. If it cannot be activated normally, it must be activated manually. The specific operation notes are as follows: the key is that the backup activation genuine "pass file" must be prepared in advance in the first three steps, and then continue to install the genuine activation in the following steps. If you still cannot activate it successfully after the operation, consider using unofficial genuine activated clone installation or other methods to activate it.

Most notebooks are equipped with solid state drives and mechanical hard drives, if the SSD is from a disk or a non-system disk, after activating win10, the next thing to do is to use the Aome partition assistant to migrate the win10 system to the SSD solid state disk, and then set the first drive disk to the SSD disk root boot is done, and you can experience the refreshing speed of the SSD second switch.

[note 1] you are using "permanently activated" Windows 7 / 8 / 8.1. you want to skip the tedious upgrade steps, format and install Win10 and activate the new Win10 directly:

1. On your current Win7 / Win 8 / 8.1 system, use "hard disk mount of soft media" or right-click to select the image that mounts the Win10

two。 Find the program named "gatherosstate.exe" under the Sources folder in the Win10 image and copy it to the desktop

3. Double-click to run gatherosstate.exe, wait a moment, and it will generate a file called "GenuineTicket.xml" on the desktop. As can be seen from the name of the file, GenuineTicket.xml means "authentic pass". It stores the system activation information of the current computer. You can save it with a USB flash drive. We will need this file later.

4. Format the newly installed Windows 10 system in any way you like, but make sure that the Win7/8 corresponds to the version of Win10. For example, the home version of Win7 can only activate the home version of Win10. It is recommended to install the hard disk quickly and carefree (it can be done in 15 minutes and 30 minutes).

5. During the installation of Windows 10, when prompted to enter the key, choose to skip, after Win10 installation is complete and enter the desktop, press the keyboard Win+R shortcut key to open "run", enter the contents of the following quotation marks and click "% ProgramData%\ Microsoft\ Windows\ ClipSVC\ GenuineTicket" then the system will open a folder, copy the previously generated GenuineTicket.xml files to this folder, ensure that the computer is connected properly, and then restart the computer. After the computer is rebooted, Win10 will be activated automatically after a moment. If it is not activated, enter "Settings" manually, click "Windows is not activated. Please activate Windows now" link at the bottom of the window, and then click the "activate" button under "activate Windows online" to activate manually.

[note 2] prerequisites for "genuine activation": first, the first activation must be upgraded to a dual system on an "activated" win7/8.1 system (only need win10 single system update later) to activate. Second, Microsoft officially activated to turn off the "free upgrade" function and use the same account installation system: in order to better experience the synchronization function of win10 "unified", it is highly recommended to use only one Microsoft mailbox when one person uses multiple win10 devices at the same time. @ outlook.com) account installation and login to the win10 system

[note 3] the Aomei partition assistant system migrates SSD and clicks on the menu to submit, wait for completion, and set SSD as the first drive before restarting the computer. If the computer can not start normally, turn off the computer when rebooting, unplug the power cord of the mechanical hard disk, after it can enter the system, if the mechanical hard disk is still used on the computer, then plug the power cord of the mechanical hard disk into the "jumper" to swap the master and slave hard drives again. If you can't recognize it from the disk at once, just restart it a few more times.

[note 4] dual-hard disk computer SSD as the operating system master disk, there may always be annoying Windows Update automatic update and upgrade errors in the future. Please prescribe the right medicine for Baidu's error until you find a suitable solution to practice a few more times. (the common way is to uninstall the third-party system management tools such as "soft media Rubik's cube" and stop the Windows Update service. Delete C:\ Windows\ SoftwareDistribution\ DataStore and all files under C:\ Windows\ SoftwareDistribution\ Download, restart your computer, start the Windows Update service and re-check for updates to update and upgrade Win10 normally. Or simply stop the Windows Update service and manually install the RTM upgrade patch (Microsoft released "Windows Update stand-alone installer" on Tuesday's update day) or the original image format clean and install the latest version of Win10, which can also improve the operation level of Win10 update management. Notebook computers use win10 preview version to test, naturally have to bear the risk of system instability and error prone, "green screen" will be a common thing, it is recommended to use "slow" stable version or RTM version of Win10

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.