Shulou(Shulou.com)06/03 Report--

Prepare 1 virtual machine image 2 install VMware new CentOS7.7 virtual machine 1 enter VMware, click New Virtual Machine will pop up the following screen and click typical, then click next

2 after clicking next, the following screen will pop up and click to install the operating system later, and then click next.

3 Click next, the following screen pops up, click linux, then click the version, select CentOS7 64 bit, click next.

4 after clicking next, the following screen pops up to change the virtual machine name to (custom) virtual machine storage location (custom). Click next.

5 Click next, the following screen pops up, set the maximum disk size to 200G, then click Save Virtual Machine disk as a single file, click next.

6 after clicking next, the following screen will pop up and click Custom hardware.

Click the first item to set the virtual machine memory above 1024MB

Click the second item to set the number of processors to 2 cores or 2 cores

Click the third item, click to use the ISO image file, click to browse and select the image you downloaded.

Click the fourth click on the host mode only (you can add the bridge mode later according to the usage) to complete and click close.

Will go back to the following picture and click finish.

7 when you click finish, the following image will pop up and click to turn on the virtual machine.

8 will pop up the following picture and click the second line to detect whether there is something wrong with the image we downloaded. At this time, we need to wait for a period of time.

9 when finished, the following picture will pop up and select the default option. Click continue.

After 10 clicks, the following picture will pop up and click the first item.

The following picture will pop up and select the time zone for Shanghai and change the time to the correct time. Click Done.

The fifth item will be selected in the following picture after 11:00 (note: horizontal number)

After clicking, the following figure will pop up and select the seventh item (Note: this option is the graphical interface) and click Done.

After 12 clicks, it will play this interface and click item 6 to partition the disk.

Click on it and the following picture will pop up. Click I will configure partitioning and click Done.

The following picture will pop up and click lvm to select the first one.

As shown in the picture

Click + add boot partition size 1G and click the second option Add mount point

Click + add / partition size 100G again and click the second option Add mount point

To add / data again, enter 50g manually and click the second option Add mount point.

Add swap 3G again and click the second option Add mount point

Click Done when the setup is complete

The following picture will pop up and click the second Accept Changes.

When 13 is finished, the following picture will pop up and click item 8.

Click to start the network card

Click Appiy after changing the network name, click Done

14 when it is finished, the following picture will pop up and click the second item.

Click the icon

Create root password (password) Custom Click Done

Click the icon

Create a normal user-defined user name and password (password)

You need to wait for some time after you finish it.

Click Reboot when loading is complete

Initialization process after restart

Click the icon

After clicking, the following picture will pop up and check Iacc. Click Done

Click the icon

Click and pop up the following image

Click and pop up the following picture to open the network card as last time and click Done

Click and pop up the following picture and click FINIS.

The virtual machine is created and Not listed is entered as root.

After entering, you can choose the language. It is recommended to choose English. Click NEXT after selecting.

Click to pop up the following picture and click Next by default.

After clicking, the following picture will pop up and click Next.

After clicking, the following picture will pop up and click

After clicking, the following picture will pop up and click

After clicking, the following picture will pop up and click the x number.

Complete

* * after the virtual machine is created, it is found that there is no IP address to execute the following command

Edit the / etc/sysconfig/network-scripts/ifcfg-ens33 file and set the ONBOOT to yes

Ens33 is the name of the network card, which may be different.

Restart the network with service network restart

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.