Shulou(Shulou.com)05/31 Report--

This article mainly introduces the relevant knowledge of "what is the partition method of Ubuntu Linux system". The editor shows you the operation process through an actual case. The operation method is simple, fast and practical. I hope this article "what is the partition method of Ubuntu Linux system" can help you solve the problem.

I. the concept of Linux zoning

First of all, I would like to introduce the concept of partition in linux, which is hard for me to learn at the beginning. In Linux, each hard disk device can have up to four primary partitions (including extended partitions), and any extended partition must occupy a primary partition number, that is, in a hard disk, there are up to four primary and extended partitions. For earlier DOS and Windows (versions prior to Windows 2000), only one primary partition was recognized, and the partition could be further refined by adding a logical drive letter (logical partition) to the extended partition.

The role of the primary partition is for the computer to boot the operating system, so the boot of each operating system, or bootstrap, should be stored on the primary partition. This is the difference between primary partition and extended partition and logical partition. When we specify the bootloader to install the boot Linux, it should be specified on the primary partition, which is an example of *.

Linux specifies that the primary partition (or extended partition) occupies the first four numbers from 1 to 16. Take * IDE hard drives as an example, the primary partition (or extended partition) occupies hda1, hda2, hda3, hda4, while the logical partition occupies 12 numbers such as hda5 to hda16. Therefore, each hard drive under Linux has a total of up to 16 partitions.

For logical partitions, Linux states that they must be built on extended partitions (as well as on DOS and Windows systems), not primary partitions. Therefore, we can see that extended partitions can provide a more flexible partition mode, but cannot be used as a boot for the operating system.

Before, I was not familiar with these concepts, so I took a lot of detours in the zoning. So, in the end what is a good zoning plan, I think it is a matter of opinion, I am divided in this way. In principle, / and / home basically * is to mount two partitions separately, because home can be regarded as a my document in windows, and the home is larger if you have more personal data. It doesn't matter if it's a little smaller. It's said that at least 2G, I haven't tried it either. Others, such as / tmp and / var, because of the large number of active files, in order to avoid the impact of their file fragments on other areas, they hang a zone. * * / opt mainly installs large software. If you have any extra partitions, hang one for him.

2. Start zoning

Ok, I look at it this way, first of all, divide a 100m main partition out, mount boot. All the files needed to start grub are in the / b o o t directory. In this way, even if there is a problem with the work partition, it can still be started as long as there is no problem with the partition. Therefore, the method of * is to divide the root file into a section with a maximum size of 64m. I gave 100m for insurance.

The subsequent partitions all exist in the form of extended partitions, and there are many logical partitions under the extended partitions.

First create a swap partition that is twice or twice the size of powerless memory. If your memory is 1G like mine, just tick 1G. In fact, it doesn't need to be that big. Remember to change the partition format to linux-swap.

Then create a partition as large as possible and give it to / usr, because most of the system software is stored here, including X Server and other graphical interface programs. I divided 20 gigabytes.

Next, create a mount partition for / home. Considering that I have a lot of work documents, source code and programs are often put here, so I gave 10G.

For others, such as tmp,var, single-user workmachines don't have to be considered. Of course, I don't know if there will be server applications on my machine in the future, but I still allocate 2G of space to var.

All other spaces are mounted to /. Although 2G is generally enough, but the more the better.

Note: in many cases, if you use the installation tool partition that comes with the ubuntu CD, there will be a lot of problems. If you encounter a problem, two ways are recommended:

1 in the environment of live CD, use sudo fdisk / dev/xxx directly under the terminal

To partition, and then w to save the reboot, and then enter the installation tool, manually edit the registry it recognizes is your edited partition table, do not need to modify the next step.

2 you can also use the fdisk of livecd to divide the area, and then use the livecd on the CD

Installer program, installed on the command line. However, this installer only requires you to mount / and swap. What about the other partitions? You can divide it first, or you can divide it after installing the system. What if you mount other partitions to the desired directory? For instance. If you want to put /

To mount home/user under the new sda8 partition, you can do this:

First, put / dev/sda8 mount into / mnt/sda8. If you don't have this directory, mkdir yourself.

Then, cp-R / home/user/* / mnt/sda8/user, and cp-R / home/user/.* / mnt/sda8/user

Finally, modify / etc/fstab by adding a line / dev/sda8 / home ext3 defaults 0 2 (parameters are determined by yourself).

This is the end of the content about "what is the partition method of the Ubuntu Linux system". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.