Shulou(Shulou.com)06/01 Report--

Topic: the wire clamp of the most commonly used network application tool

It's this thing down there.

Description:

The tool of wire clamp is a sharp tool for the production of network cable, but it also has many disadvantages. The choice of this equipment must be more expensive, not that the tool is cheap and cannot be used, but the cheaper the tool is. The materials are almost the same, that is, there are problems in workmanship. Pay attention to these two pieces: 1. Security risks, when cutting the wire, it is very easy to accidentally hurt your hand. Or be extra careful when using it, and suggest buying a net clamp with safety measures, which is the one I recommend here. 2. there is no guarantee of quality, and every penny is sold. When making the network cable, it is found that some network core cards are wrong, which is always prone to problems.

How to make network cable

This requires experience. in order to ensure that there is no problem with the network cable, it is recommended to make 1 or 2 crystal heads within 1 minute. Although the most powerful one can be 4 or 5 per minute, this is really not recommended. It is done quickly, and the quality must be problematic. Needless to say. To make the crystal head, the first step is to cut the line, and the length of the leaking end of the line is controlled between the 1cm~1.5cm, which requires experience. I usually don't cut too long, usually just around the 1cm. The second step is to sort out the twisted pair order, orange, orange, green, blue, white, green, brown and brown. It is recommended to use the 568B sequence, which is usually the case. The third step is to tidy up the thread, and then cut the wire. About keeping the length of the 0.8cm, the network cable made in this way is better than the one sold outside. The fourth step is to insert the cable into the crystal head, slowly, to ensure that each of the wire cores is right, and there is no short one. After inserting it, you need to pile it in a little harder to ensure that all the network cables are flat during visual inspection of the cross section, and all of them are in contact with copper chips. Otherwise, one of them has no contact. The network cable is impassable, and finally needs to be cut and redone, so it is better to be careful and do it all at once. The fourth step, of course, is to use wire clamps to press the crystal head. The standard of production is that the network cable of the 0.25cm~0.3cm whose crystal head has not been cut is stuck, so that the network cable is more solid.

Why do you need to make the network cable manually?

1. Cheap. The cost of making a 1m-long network cable is about 5 to 8 wool, while buying one varies from 3 to 10 yuan, and the quality is not guaranteed.

2. Make the network cable according to the actual needs, so this length can be controlled. You need a few meters to make a few meters long. In general, the length of the network cable at the office location is about 0.5 to 1m, which is basically enough. Some need to be a little longer. You can meet the requirements to make a longer one.

3. For example, when installing monitoring or jumpers for other devices, you need to actually measure the distance, then walk the wire, and then make the network cable. It is impossible to meet all your requirements on the Internet, so you still have to be able to make the network cable by hand. It's a matter of minutes. It's very simple.

Summary:

1. Make the length control of the network line according to the actual demand.

2. The length of the section line, depending on the feel, it will feel if you do too much.

3. Arrange the order of the network cable, this is very experience, there is no other only do more to have experience, and then the more beautiful the network cable will be.

4. If there is no dissection of the network cable, you need to control the 0.25cm~0.3cm or so, and you need to do more to control this. The pure manual work needs to be repeated and repeated, and there is no other way.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.