Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, how to use the photocopier, many people do not know the use of the photocopier, now let's take a look!

First wake up the photocopier and check whether there is enough paper and ink in the photocopier; then check whether the paper to be copied is hard, put the paper flush, and the copy side faces the glass; then set the number of copies and [copy size] to be copied, and finally click the start button to start copying. The following is a detailed description:

1. Today's photocopiers generally complete the preheating process automatically. When the photocopier is sleeping, just press any key to wake up and press the [start] button.

two。 First of all, check whether there is enough ink and paper through the screen above the photocopier

3. Check the copied material. Before copying, check the paper to be copied. Please pay special attention to not leaving hard objects such as thumbtacks and staples on the paper so as not to damage the photocopier.

4. Open the top cover of the copier, put the manuscript on the frame of the copier, and put the side that needs to be copied on the glass; after inspection, cover the top of the copier

5. Set the required number of copies [copies], there will be a separate button on the general operator panel; you can also adjust the copy size as needed, and click the zoom button to adjust the copy size. Common functions can be operated through the touch screen on the photocopier, with corresponding partitions on the screen. Click to select.

6. After the setting is completed, click the largest [start] button in the operation interface.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.