Shulou(Shulou.com)06/01 Report--

It is believed that many inexperienced people have no idea about the meaning and solution of 12 kinds of blue screen error codes in XP system. Therefore, this paper summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

1. Error code: 0x0000001E

Description text: KMODE-EXPTION-NOT-HANDLED

The main reason: a kernel-mode process attempts to execute an illegal or unknown processor instruction.

Solution: make sure you have enough disk space, especially when performing a new installation. If the error message indicates a specific driver, disable it. If you cannot start your computer, try starting it in safe mode to remove or disable the driver. If you have a video driver that is not supported by Microsoft, try to switch to the standard VGA driver or the appropriate driver provided by Windows. Disable all recently installed drivers and make sure you have the latest version of the system BIOS.

2. Error code: 0x00000023 or 0x00000024

Description text: FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM

Main cause: the problem occurs in Ntfs.sys, which allows the system to read and write driver files for NTFS drives.

Solution: run the system diagnostic software provided by the computer manufacturer, especially the hardware diagnostic software. Disable or uninstall all antivirus software, disk defragmenter or backup programs. Run the Chkdsk / f command from the command prompt to check the hard drive for damage, and then restart the computer.

3. System error code: 0x0000002E

Description text: ATA-BUS-ERROR

Main reason: system memory parity error, usually caused by hardware problems.

Workaround: remove all recently installed hardware. Run the system diagnostic software provided by the computer manufacturer, especially the hardware diagnostic software. Ensure that both the hardware device driver and the system BIOS are up to date. Using the system diagnostics provided by the hardware vendor, run a memory check to find faulty or mismatched memory. Disable BIOS memory options, such as cache or shadow.

4. Error code: 0x0000003F

Description text: NO-MOR-SYSTEM-PTES

Main reason: the driver is not cleaned correctly.

Solution: disable or uninstall all antivirus software, disk fragmentation handlers or backup programs.

5. System error code: 0x00000058

Description text: FTDISK-INTERN-ERROR

Main reason: one of the primary drives in the fault-tolerant set failed.

Solution: use the Windows installation disk to start the computer and boot from the mirror system drive. For information about how to edit the Boot.ini file to point to the mirror system drive, search for "Edit ARC path" at the MIcrosoft support Services Web site.

6. System error code: 0x0000007B

Description text: INACCESSI-BLE-BOOT-DEVICE

Main reason: failed to initialize the Istroke O system (usually refers to the boot device or file system).

Solution: boot sector viruses usually cause this stop error. The latest version of the antivirus software can be used to check for viruses on your computer. Remove all recently installed hardware. Check the Microsoft hardware compatibility list to ensure that all hardware and drivers are compatible with Windows. If you use SCSI adapters, you can obtain the latest Windows drivers from your hardware vendor, disable synchronization negotiation for SCSI devices, check that the SCSI chain is terminated, and check the SCSI ID of those devices.

If you are using an IDE device, define the IDE port on the motherboard as the only primary port. Check the master / slave / unique settings of the IDE device. Uninstall all IDE devices except the hard drive. If the computer has been formatted with the NTFS file system, restart the computer and run the Chkdsk / fUnir command on the system partition. If the system cannot be started due to an error, use the command console and run the Chkdsk / r command to determine if the file system is corrupted. If Windows cannot run the Chkdsk command, move the drive to another one.

7. System error code: 0x0000007F

Description text: UNEXPECTED-KERNEL-MODE-TRAP

Main reason: it is usually caused by hardware or software problems, but generally caused by hardware failures.

Solution: check the Microsoft hardware compatibility list to ensure that all hardware and drivers are compatible with Windows. This problem occurs if the computer motherboard is not compatible. Uninstall all recently installed hardware. Run all system diagnostic software provided by the computer manufacturer, especially the memory check. Disable BIOS memory options, such as cache or shadow.

8. System error code: 0x00000050

Description text: AGE-FAULT-IN-NONPAGED-AREA

Main reason: memory error (data cannot be exchanged to disk using paging files).

Workaround: uninstall all recently installed hardware. Run all system diagnostic software provided by the computer manufacturer, especially the memory check. Check that all new hardware or software is installed correctly, and if it is a fresh installation, contact the hardware or software manufacturer for any Windows updates or drivers that may be required. Disable or uninstall all antivirus programs. Disable BIOS memory options, such as cache or shadow.

9. System error code: 0x00000077

Description text: KERNEL-STEL-STACK-INPAGE-ERROR

The main reason: the pages needed for kernel data cannot be read into memory from the paging file.

Solution: use the latest version of the antivirus software to check for viruses on your computer. If a virus is found, remove it from your computer. Refer to all system diagnostic software provided by the manufacturer, especially the memory check. Disable the BIOS memory option, such as cache,shadow.

10. System error code: 0x00000079

Description text: MISMATCHED-HAL

The main reason: the hardware abstraction layer does not match the kernel or machine type (usually when uniprocessor and multiprocessor configuration files are mixed on the same system).

Solution: to resolve this error, replace the wrong system file on your computer with the command console.

11. System error code: 0x80040509

Solution: this is the problem caused by the automatic update of the system. We can enter "safe Mode" to open the "Control Panel", select the "add / remove programs" component, and change the "Windows XP hotfix" that appears at the top of the "current installer" list. Restart the computer after performing the Delete operation.

On the computer running Windows, then run the Chkdsk command on the drive from this computer. If the system still fails to start normally, then you can enter "safe mode" again to perform the program uninstall operation, and put all the "Windows XP hotfix." Just delete it all. After you can start the operating system normally, you can disable the automatic update feature of Windows XP to prevent such prompts from appearing again.

12. After updating Windows XP and rebooting, the computer displays "Cannot Display Video Mode (unable to display video mode)" or "Out of Scan Range Error (out of scan range error)" error message.

Solution: you can log in to safe mode with the administrator account, then right-click in the blank area of the desktop, select the "Properties" command on the right-click menu, click the "Settings" tab in the pop-up display properties window, reduce the screen resolution to 1024 × 768, and finally click the "OK" button and restart the computer.

After reading the above, have you mastered the meaning of 12 kinds of blue screen error codes of XP system and how to solve them? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.