Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, how to install the heating furnace diagram, how to install the heating furnace many people do not know, now let's take a look!

1. Household heating stove is a good choice. However, if a heater is installed at home, improper installation may cause soot poisoning and avoid heater gas poisoning. So how to install it to ensure the safety of the heater? Pay attention to the following aspects during installation. Benshaw now introduces it to everyone.

2. The heater cannot be installed in the bedroom or in a room directly connected to the bedroom to prevent gas poisoning. The highest point of the water supply pipe of the coal-fired heating furnace should not be 6 meters higher than the water inlet of the furnace, otherwise it will lead to excessive pressure and deformation of the protective body. In addition, the indoor environment should not be too closed, and the coal used should be dry. Don't get too wet. Prevent the room of the heater from being ventilated and deflated frequently.

3. The inclination of the pipeline in the horizontal state should be 100: 1, which is beneficial to exhaust. The expansion tank should be installed in the system and the height of the tank should be more than 250 mm from the highest point of the system. Pressure reducing tubes should be installed at the outlet of the reheating furnace. Its diameter should not be less than the pipe diameter. The height of the radiator center should be higher than the furnace inlet and outlet center 300mm, the higher the better, which is beneficial to the circulation. Do not install valves on pressure reducing pipes, exhaust pipes and supply water tanks, otherwise it will be very dangerous.

4. The A-type coal stove is more than two meters long, and the bulk coal furnace must use a chimney with a diameter of 120mm, and it must be more than four meters long. The chimney needs to be covered, and it is best to tear it down in summer. Those who violate this rule are not covered by the warranty. Horizontal chimneys should be shorter, with fewer elbows, and windward chimneys should be equipped with tees. The connection of the inlet and outlet is flexible and convenient for maintenance.

5. When the circulation is not smooth due to non-blocking reasons such as too long pipe, the potential difference between the heater and the radiator can be further increased to promote the water circulation; otherwise, a small hot water pipe pump should be added to force the water circulation. Do not install the pump on the lower horizontal main pipe and push the water to the stove, as the pressure of the pump will damage the stove.

6. To sum up, some problems that should be paid attention to in the installation of home heating furnace are introduced. In the cold winter, household heating stove is a necessary household product. Home heating stove can bring you a warm and comfortable home life. Household heating stove enjoys a good reputation in the market, and it is a product worthy of trust and use.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.