Shulou(Shulou.com)06/01 Report--

In order to solve the problem of configuring hidden power options in Windows 10, this article introduces the corresponding analysis and solutions in detail, hoping to help more partners who want to solve this problem to find a more simple and easy way.

In today's post, we will share how to configure a variety of basic power options; you can try to improve power efficiency, thereby affecting battery life and the overall performance of windows 10 devices. Let's delve into it.

What are the power options in windows 10

The power option is a setting under the hardware and Sound category in the Windows Control Panel that allows users to adjust power plans and power settings on their computers. In short, these are very convenient options that allow you to set up on your computer and enjoy proper performance and battery balance. By adjusting them, performance can be better than battery life, and vice versa. In addition, they enable you to switch between power plans, choose to close the lid and press the power button, respond to severe battery shortages, and so on.

Configure hidden power options in windows 10

The power options we will configure are:

Processor performance degradation threshold

Processor performance improvement threshold

Allow to leave the mode policy

When sharing media

Allow policies required by the system

Allow sleep to be opened remotely

The system is unattended, sleep overtime.

USB 3 Link Power Management

Hub selective suspend timeout

Allow the required policies to be displayed

Cover closing action

Lid opening action

AHCI Link Power Management-Adaptive

Hard disk burst ignore time

AHCI Link Power Management-HIPM / DIPM

Video playback quality deviation

When playing a video

Wireless Adapter Settings

Network connection in standby

Adaptive backlight

SEC NVMe idle timeout

The brightness of the display is dim.

To access the power options for the power plan you want to configure, right-click the battery icon on the notification area of the taskbar, select the power option, and in the pop-up window, click change the plan settings for the power plan. and then click change Advanced Power Settings.

Now let's see how to add or remove these power options in windows 10.

1) processor performance reduction threshold

The processor performance degradation threshold setting in Power options allows users to specify a lower busy threshold that must be met before the processor performance state (percentage) can be reduced.

You must be logged in as an administrator to add or remove this setting in Power options.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_PROCESSOR 12a0ab44-fe28-4fa9-b3bd-4b64f44960a6-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_PROCESSOR 12a0ab44-fe28-4fa9-b3bd-4b64f44960a6 + ATTRIB_HIDE

Exit the command prompt and restart the device.

2) processor performance improvement threshold

Through the processor performance improvement threshold setting in Power options, users can specify a lower busy threshold that must be met (as a percentage) before the processor performance state can be improved.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_PROCESSOR 06cadf0e-64ed-448a-8927-ce7bf90eb35d-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_PROCESSOR 06cadf0e-64ed-448a-8927-ce7bf90eb35d + ATTRIB_HIDE

Exit the command prompt and restart the device.

3) allow to leave the mode policy

When called, leaving the pattern does the following:

Turn off the video signal on the port.

Mute all system audio.

Block HID and PS / 2 input devices.

Put the CPU in "adaptive" mode, which saves power depending on how it is running.

Notifies kernel mode and user mode components of the transition.

The BIOS is notified by the transformed ACPI control method.

Wake up when plugging in a flash device (USB FOB, flash card).

The CD will wake up after it is inserted into the drive.

The purpose here is to provide the machine with a "user does not exist" status so that you can walk away because you know that recording is going to happen (or will not be interrupted) and will not display screens, audio, etc., to the user. * No * is intended to become a power management state.

If you want to enable leave mode for your computer, the allow leave mode policy setting in the power options allows the user to specify yes or no.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_SLEEP 25DFA149-5DD1-4736-B5AB-E8A37B5B8187-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_SLEEP 25DFA149-5DD1-4736-B5AB-E8A37B5B8187 + ATTRIB_HIDE

Exit the command prompt and restart the device.

4) when sharing media

The when sharing Media setting under Multimedia Settings in Power options allows users to specify the operation of the computer when the device or computer plays media from the computer.

The user can specify the following actions below:

Allow the computer to go to sleep = the device and the computer will not be able to play the media in the computer when they go to sleep.

Prevent idle sleep = devices and computers will be able to play media in your computer unless you put it to sleep.

Allow the computer to enter the leave mode = in the leave mode, the device and computer will be able to play the media in the computer.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes 9596FB26-9850-41fd-AC3E-F7C3C00AFD4B 03680956-93BC-4294-BBA6-4E0F09BB717F-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes 9596FB26-9850-41fd-AC3E-F7C3C00AFD4B 03680956-93BC-4294-BBA6-4E0F09BB717F + ATTRIB_HIDE

Exit the command prompt and restart the computer.

5) allow policies required by the system

The allow policies required by the system setting in the power options allows the user to specify Yes (default) or No to allow the program to prevent the computer from automatically going to sleep.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_SLEEP A4B195F5-8225-47D8-8012-9D41369786E2-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_SLEEP A4B195F5-8225-47D8-8012-9D41369786E2 + ATTRIB_HIDE

Exit the command prompt and restart the computer.

6) allow sleep to be opened remotely

The allow remote on Sleep power setting configures the network file system to prevent the computer from automatically falling asleep when the remote network file is opened. This can put your machine to sleep when a file opened remotely is not open.

In Windows, allow remote Sleep is turned off by default and cannot be changed in Power options.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_SLEEP d4c1d4c8-d5cc-43d3-b83e-fc51215cb04d-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_SLEEP d4c1d4c8-d5cc-43d3-b83e-fc51215cb04d + ATTRIB_HIDE

Exit the command prompt and restart the computer.

7) system unattended sleep timeout

The system unattended sleep timeout power setting is the idle timeout of the system before returning to low-power sleep after waking up unattended.

The system unattended sleep timeout is set to two minutes and cannot be changed in the Power options by default in Windows.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes SUB_SLEEP 7bc4a2f9-d8fc-4469-b07b-33eb785aaca0-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes SUB_SLEEP 7bc4a2f9-d8fc-4469-b07b-33eb785aaca0 + ATTRIB_HIDE

Exit the command prompt and restart the computer.

8) USB 3 Link Power Management

The USB 3 links power management settings in the power options allow users to specify power management policies for USB 3 links when they are idle.

Users can specify one of the following policies:

Off = U1 U2 state is not enabled.

Minimum power savings = enable the U1 U2 state, but select a conservative timeout value to optimize performance.

Medium Power savings = enable the U1 U2 state and select the best timeout value to balance power consumption and performance.

Maximum energy savings = enable the U1 U2 state and select an aggressive timeout value to optimize power consumption.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes 2a737441-1930-4402-8d77-b2bebba308a3 d4e98f31-5ffe-4ce1-be31-1b38b384c009-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes 2a737441-1930-4402-8d77-b2bebba308a3 d4e98f31-5ffe-4ce1-be31-1b38b384c009 + ATTRIB_HIDE

Restart your computer.

9) USB Hub selective suspend timeout

The USB Hub selective pause timeout setting in Power options allows users to specify idle timeouts for all USB hubs in milliseconds.

Open a command prompt for elevated permissions and execute the following command:

To add: copy and paste the following, then press Enter:

-powercfg-attributes 2a737441-1930-4402-8d77-b2bebba308a3 0853a681-27c8-4100-a2fd-82013e970683-ATTRIB_HIDE

Delete: copy and paste the following, and then press Enter:

-powercfg-attributes 2a737441-1930-4402-8d77-b2bebba308a3 0853a681-27c8-4100-a2fd-82013e970683 + ATTRIB_HIDE

Restart your computer.

10) allow the required policies to be displayed

The policy setting for allow display requirements in the power options allows the user to specify whether the Windows allows the application to temporarily prevent the monitor from automatically lowering its brightness or to turn off the monitor to save power.

This is the answer to the question about what it is to configure hidden power options in Windows 10. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel for more related knowledge.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.