Shulou(Shulou.com)06/01 Report--

Windows 10 upgrade error code and solution example analysis, many novices are not very clear about this, in order to help you solve this problem, the following editor will explain in detail for you, people with this need can come to learn, I hope you can get something.

If your windows 10 upgrade fails and you have written down the error code, this post provides some basic solutions to troubleshoot and resolve the problem. We have learned how to resolve windows 10 installation and update failures. In this article, I will list the upgrade error codes and their resolution procedures, which are from Microsoft.

How to identify what the error code represents:

Suppose the error code is 0x80070070

-- "8" indicates that this is a Win32 error code

The last four digits are 0070, so look for 0x00000070 in the Win32 error code table on MSDN.

-- error is: ERROR_DISK_FULL

Suppose the error code is 0xC1900107

"C" indicates that this is a NTSTATUS error code.

-- the last four digits are 0107, so look for 0x00000107 in the NTSTATUS values table on MSDN.

-- error is: STATUS_SOME_NOT_MAPPED

Some result codes are self-evident, while others are generic and need to be analyzed.

Windows 10 upgrade error Cod

0xC1900101-0x20004: this is usually caused by outdated drivers. Remove all unused devices and drivers, update drivers, uninstall security, and remove all unused SATA devices.

0xC1900101-0x2000c: this is usually caused by outdated drivers. Disconnect all devices connected to the system (except the mouse, keyboard and monitor), contact your hardware vendor for updated device drivers, and be sure to accept download and install updates (recommended) at the beginning of the upgrade process.

0xC1900101-0x20017: this is a SafeOS startup failure, usually caused by a driver or non-Microsoft disk encryption software. Windows was unable to migrate the driver, causing the operating system to roll back. Be sure to update all of these drivers, open the Setuperr.log and Setupact.log files in the% windir%\ Panther directory, find the problem driver, and update or uninstall the problem driver.

0xC1900101-0x30018: the device driver has stopped responding to setup.exe during the upgrade process. Disconnect all devices connected to the system (except the mouse, keyboard and monitor), contact the hardware vendor for updated device drivers, and ensure that downloads and installation updates are accepted at the beginning of the upgrade process (recommended).

0xC1900101-0x3000D: this can happen due to a problem with the display driver. Disconnect all devices connected to the system (except the mouse, keyboard and monitor) and update or uninstall the display driver.

0xC1900101-0x4000D: rollback occurred due to driver configuration issues. Try replacing the video adapter. Make sure you have enough disk space and disable BIOS memory options such as caching or shadows.

0xC1900101-0x40017: this is usually caused by the wrong driver, antivirus filter driver, or cryptographic driver. Perform a clean boot, then try to upgrade to windows 10 and make sure you select the download and install update option (recommended).

0x8007025D-0x2000C: download ISO / media again and try the upgrade again. Alternatively, use the Media creation tool to recreate the installation media.

0x80070490-0x20007: verify the device driver on your computer and analyze the log file to determine the problem driver.

0xC1900101-0x2000c: update the drivers on your computer and select download and install updates (recommended) during the upgrade process. Disconnect devices other than the mouse, keyboard and monitor.

0xC1900200-0x20008: refer to the windows 10 specification and verify that the computer meets the basic requirements.

800704B8-0x3001A: an extension error occurred during the boot phase. Disable or uninstall non-Microsoft antivirus applications, disconnect all unnecessary devices, and perform a clean boot.

8007042B-0x4000D: this problem may occur due to a file system, application, or driver problem. Analyze log files to identify files, applications or drivers that cannot be migrated / disconnect, update, delete, or replace devices or objects. It may occur due to a corrupt registry key under HKLM\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ ProfileList or an invalid file in the\ Users directory. To fix this error, make sure that the deleted account is not in the Windows registry and that the files in the\ Users directory are valid. Delete the invalid file or user profile that caused this error. The specific files and configuration files that caused the error are recorded in the Windows installer log file.

8007001F-0x4000D: this is a general failure and the device connected to the system may not function properly. Analyze log files to identify devices that are not working properly, disconnect, update or replace devices.

8007042B-0x4001E: installation failed in the second boot phase when attempting the PRE_OOBE operation. There are several possible reasons for this error. Try the quick fix mentioned below if you do not successfully analyze the log file to determine the problem and solution.

0xC1800118: follow KB3194588.

0xC1900200: make sure that the system you are trying to upgrade meets the underlying system requirements. For information, see the windows 10 specification.

0x80090011: contact your hardware vendor and update all device drivers. It is recommended that you establish an active Internet connection during the upgrade process. Be sure to accept download and install updates (recommended) at the beginning of the upgrade process.

0xC7700112: this issue has been resolved in the new version of Upgrade Assistant. Be sure to accept download and install updates (recommended) at the beginning of the upgrade process.

0x80190001: to resolve this problem, download and run the Media creation tool. See download window 10.

0x80246007: try other ways to upgrade the operating system. Download and run the Media creation tool. See download window 10.

0xC1900201: contact the hardware vendor for new updates.

0x80240017: administrative policies enforced by the organization may prevent escalation. Contact your IT administrator.

0x80070020: use the MSCONFIG tool to perform a clean boot on your computer, and then try to perform the update again. For more information, see how to perform a clean startup in Windows.

0x80070522: make sure you are logged in as a local administrator or have local administrator privileges.

0xC1900107: restart the device and run setup again. If restarting the device does not resolve the problem, use the disk cleanup utility and clear temporary and system files. For more information, see disk cleanup in windows 10.

0xC1900209: incompatible software prevents the upgrade process. Uninstall the application and try to upgrade again. For more information, see pre-upgrade Verification with windows 10 with SETUP.EXE. You can also download the Windows Assessment and deployment Kit (ADK) for windows 10 and install the application compatibility tools.

0x8007002: to resolve this issue, try the operating system deployment test on the client in the same VLAN as the Configuration Manager server. Check the network configuration for random client-server connection problems that occur on the remote VLAN. In addition, SMSTS.log is analyzed.

0x80073BC3-0x20009 0x8007002-0x20009ret 0x80073B92-0x20009: these errors occur during partition analysis and validation and may be caused by the presence of multiple system partitions. To resolve these errors, disconnect or temporarily disable drives that contain unused system partitions. After the upgrade is complete, you can reconnect the drive. Alternatively, you can delete unused system partitions.

0x80070004-0x3000DMagol 0x80070005-0x4000Dre0x80070004-0x50012 0x20007 80040005-0x20007: analyze log files to determine the problem.

0xC190020eMagol 0x80070070-0x50011 0x80070070-0x50012 0x60000 0x80070070-0x50012: these errors indicate that the computer does not have enough free space to install the upgrade.

For detailed reading, you can visit Microsoft.

Standard solution processes or general quick fixes include:

-- verify that there is at least 16 GB of free space

-- disconnect all external hardware

-troubleshooting running Windows Update

-- run Windows Update

-- Uninstall non-Microsoft antivirus software

Uninstall unimportant software

-- Free disk space

-- Update firmware and driver

-- run SFC and DISM

-run the windows 10 upgrade process.

Is it helpful for you to read the above content? If you want to know more about the relevant knowledge or read more related articles, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.