Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, surveillance camera installation method, many people do not know the installation of surveillance cameras, now let's take a look at it!

After buying a surveillance camera, if you want to work properly, you must first install it, and installing the camera is often a simple but meticulous thing. After many people buy a camera, they often don't know where to start, so next we will do some steps and methods to install the surveillance camera for you.

1. Prepare related equipment and tools.

First of all, prepare working brackets, plugs, screws, screwdrivers, hammers, electric drills and other parts and working tools, and choose parts installed on the wall or other places. Measure the installation position, modify the data of expansion plugs and screws, check the contact of the pre-buried pipe, and test whether the surveillance camera circuit is working properly. After all the tests are completed, you can begin to enter the formal camera equipment installation program.

two。 Install the camera

After the preparation work is over, you can begin to install the camera; first take out the camera and choose the appropriate model and size according to the camera instructions. Of course, during installation, be careful not to touch the camera lens to prevent it from being scratched and damaged. In addition, when installing screws and expansion plugs, pay attention to the secure position of the camera. Prevent the position of the camera from deviating. During this process, the bracket should be installed and secured with great care.

3. Installation of shielding

In order to reduce the damage and impact of the external environment such as strong light, Rain Water, wind and sand on the camera and camera equipment, in general, we need to install a protective cover for the camera. So after the fixed installation of the camera, we can start to install the protective cover. First, open the relevant rear cover and entrance of the protective cover, then pull out the blocking sheet and make sure the camera is fixed. After that, install the power adapter inside the protective cover, cover the lid, arrange the relevant cable equipment, fix it, and install it on the bracket, so that the installation of the protective cover is basically completed.

4. Post-processing

When we get here, we will install the video cable. The video cable here is pre-processed. After installation, connect with BNC to ensure that the equipment is fixed and not easy to be affected.

Connect the other end of the power adapter, such as the power output and sockets, to ensure that it is working properly and fixed.

Connect the camera to the host and controller. The main operation is to connect and fix the other end of the cable with the relevant interface of the host.

Turn on the switch and power control, install the post-processing, adjust the shooting angle of the camera, so that the camera can capture the best angle.

After completing these four steps, the installation and debugging of the camera is basically completed, and the next step is to put the monitoring equipment into formal use.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.