Shulou(Shulou.com)06/02 Report--

Experimental topology diagram

one, Configure the sw2 switch sys [Huawei] sysname SW2 [SW2] vlan batch 10 20 # # create vlan10 20 [SW2] int e0Charger 2 [SW2-Ethernet0/0/2] port link-type access # # set up access [SW2-Ethernet0/0/2] port default vlan10 # # put the interface in vlan [SW2-Ethernet0/0/2] un sh [SW2-Ethernet0/0/2] int e0Accord 0lap 3 [SW2-Ethernet0/0/3] port link-type access [ SW2-Ethernet0/0/3] port default vlan 20 [SW2-Ethernet0/0/3] un sh [SW2-Ethernet0/0/3] int e0Uniplet 1 [SW2-Ethernet0/0/1] port link-type trunk # # Settingtrunk [SW2-Ethernet0/0/1] port trunk allow-pass vlan all # allows all vlan to pass through [SW2-Ethernet0/0/1] un sh [SW2-Ethernet0/0/1] int g0Unipedia 1 [SW2-GigabitEthernet0/0/ 1] port link-type trunk [SW2-GigabitEthernet0/0/1] port trunk allow-pass vlan all [SW2-GigabitEthernet0/0/1] un sh2 Configure the sw3 switch (as configured with sw2) sys [Huawei] sysname SW3 [SW3] vlan batch 10 20 [SW3] int e0Accord 2 [SW3-Ethernet0/0/2] port link-type access [SW3-Ethernet0/0/2] port default vlan 10 [SW3-Ethernet0/0/2] un sh [SW3-Ethernet0/0/2] int e0Accord 3 [SW3-Ethernet0/0/3] port link-type access [SW3-Ethernet0/0/3] port default vlan 20 [SW3-Ethernet0/0/3] un sh [SW3-Ethernet0/0/3] int e0/0/1 [SW3-Ethernet0/0/1] port link-type trunk [SW3-Ethernet0/0/1] port trunk allow-pass vlan all [SW3-Ethernet0/0/1] un sh3 Configuration of sw1 layer 3 switch sys [Huawei] sysname SW1 [SW1] vlan batch 10 20 1000 [SW1] int g0and0According to 1 [SW1-GigabitEthernet0/0/1] port link-type trunk [SW1-GigabitEthernet0/0/1] port trunk allow-pass vlan all [SW1-GigabitEthernet0/0/1] un sh [SW1-GigabitEthernet0/0/1] int g0Universe 2 [SW1-GigabitEthernet0/0/2] port link-type access # # layer 3 switched connection routing cannot be configured with trunk [ SW1-GigabitEthernet0/0/2] port default vlan 1000 [SW1-GigabitEthernet0/0/2] un sh [SW1-GigabitEthernet0/0/2] int vlanif 10 # # enter the logical interface [SW1-Vlanif10] ip add 192.168.10.1 24 # # set up the gateway [SW1-Vlanif10] int vlanif 20 [SW1-Vlanif20] ip add 192.168.20.1 24 [SW1] int vlanif 1000 [SW1-Vlanif1000] ip add 11.0.0.1 30 [SW1-Vlanif1000] Q [SW1] ip route-static 0.0.0.0 0.0.0.0 11.0.0.2 # # set the default route Default up, static 4 down, configure R1 to route sys [Huawei] sysname R1 [R1] int g0Accord 0 # # set the ip address of the interface [R1-GigabitEthernet0/0/0] ip add 11.0.0.2 30 [R1-GigabitEthernet0/0/0] un sh [R1-GigabitEthernet0/0/0] int loopback 0 # # to enter the loopback interface Set ip [R1-LoopBack0] ip add 1.1.1.1 30 [R1-LoopBack0] Q [R1] ip route-static 192.168.10.024 11.0.0.1 # # set static route [R1] ip route-static 192.168.20.024 11.0.0.15 to test network interoperability

Thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.