Shulou(Shulou.com)06/01 Report--

This article mainly introduces how to install a Teamviewer software, has a certain reference value, interested friends can refer to, I hope you can learn a lot after reading this article, the following let the editor take you to understand it.

The first step in downloading, installing, and using the software is to find a computer with Internet access, hundreds of degrees, and type "Teamviewer" to see the following interface:

Select the link point with the word "official" behind it, and then click "Free download" on the open page, as shown in the following figure.

After that, the download page pops up. If it doesn't pop up, you can click the arrow below to indicate the location to download.

After downloading, double-click the exe file to start the installation and select personal / non-business use.

Then the installation begins.

When the installation is complete, the window pops up. The following is the status that the link is not ready:

The status of ready connections is as follows:

At this point, the installation is complete.

(1) allow the ID and password in the remote control window to be the ID and password of the currently installed software machine. After installation, whether it is rebooting the computer or shutting down the software and reopening it, ID will not change, but if it is not configured, the password will change every time the software is restarted. Therefore, in order to make it convenient to set the password that you can remember, click the arc arrow next to the password above and select "set personal password".

Enter the password at the location of the arrow above and click OK, so that the password of the remote computer will not be changed casually. In addition, it is best to set the remote computer to automatically restart and automatically connect to the network, and check the option next to "start Teamviewer with Windows", so that you can connect remotely even after the computer is rebooted.

(2) when using, enter "partner ID" under "Control remote computer". After clicking the connection, the following window pops up, and you can connect after entering the password of the other party.

The interface after connecting to is as follows. Click on the lower right corner to hide the window. This is also to prevent first-time students from easily clicking on the x at the top right of the lower right corner of the window, which is tantamount to turning off the Teamviewer software on the remote computer and can no longer be connected. Unless it is set to click on the closed X to hide in the background, or someone goes to the remote computer to reopen the Teamviewer software. In a word: remember not to turn off Teamviewer software on remote desktops at will.

Multiple computers can also be remotely connected to the same computer at the same time, and the mouse can be moved to operate at the same time. With Wechat voice chat, you can achieve multi-person running a Vivado project simulation or multi-person Review Verilog code.

Of course, there is also a more important point, after remote access to the campus network, we can make full use of the advantages of the campus IP, you can access the database of multiple papers to download papers, what Wanfang, knowledge network, IEEE and other platforms can be used. You can also log on to an internal school website that can only be accessed by on-campus IP, such as Ruisi. The author has tried that all the databases for searching papers can be used except for the SCI search website (web of science (sci)). If your mentor wants you to debug on the FPGA board, he can also connect the JTAG download line to your computer and the FPGA board, power up the board and debug the FPGA remotely. Matters needing attention

In order to be able to operate remotely to the office computer for a long time, you need to prevent other settings on the computer from making it impossible to connect remotely.

(1) set the sleep time on the remote computer to "never".

(2) students with 360 security guards must pay attention to check that "nuclear crystal protection" is turned off. Otherwise, the security guard will intercept the Teamviewer remote and the mouse on the remote computer will not be able to use after the interception.

Set the nuclear crystal protection engine shown in the following figure to "not on". This will prevent Teamviewer from being intercepted by 360.

If you are really intercepted by 360, you can only try the method shown below, send the hot start key remotely each time, call up the task manager, and gradually grope for recovery step by step. The author once encountered it, and it took me more than an hour to recover.

(3) the interface and usage of Teamviewer in Linux environment is the same as that in Windows. Installation method can be self-Baidu. When downloading, Baidu can also go to the official website, choose the corresponding version, Ubuntu version or Centos version, and then complete the installation step by step according to the method introduced on the Internet, but the situation of each computer is different at the time of installation, and the patches that need to be remade are also different. The following figure shows the Teamviewer interface under Ubuntu.

Thank you for reading this article carefully. I hope the article "how to install a Teamviewer Software" shared by the editor will be helpful to you. At the same time, I also hope you will support us and pay attention to the industry information channel. More related knowledge is waiting for you to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.