Shulou(Shulou.com)06/02 Report--

Experimental environment: how to interconnect host and host network with win7 in vmware virtual machine in host mode only.

Requirements: VMware Workstation12 Pro or above, and a win7 system has been installed.

-the next step is to connect the host and the host network-

1 in the host, open the Control Panel-Network and INTERNET- Network and sharing Center, and click change Adapter Settings.

2 double-click VMware Network Adapter VMnet1 in the network connection.

3 Click Properties in the VMware Network Adapter VMnet1 status window.

Double-click the protocol version IPV4 in the property status bar.

5 after choosing to use the IP address bar below, edit a correct IP address. Do not conflict with the host IP address. The value will pop up automatically after clicking on the subnet mask. The default gateway usually has a host segment of 1, and the previous network segment is exactly the same. The address of the DNS server below may not be written. Click OK to assign the IP address.

6 return to the virtual machine, open the Control Panel-Network and INTERNET- Network and sharing Center, and click change Adapter Settings.

7 double-click the local connection in the network connection.

8 Click Properties in the Local connection status window.

Double-click the protocol version IPV4. 9 in the property status bar.

10 configure the same subnet mask and default gateway as the host, but the host at the end of the IP address does not have to be different from the host and not be 1 or 255 or 0. [255is the broadcast address, 1 is the gateway, 0 is the network number]

11 use the WIN=R shortcut key to open the run window, enter CMD and click OK.

Type PING [IP address set by your host] after the green character in the window that appears to verify whether the host is connected to the virtual machine network. China Unicom is successful if the data in the red box appears.

= some problems and errors that may be encountered in this article =

Check whether the Nic option is selected on the host-only mode (host-only) when the PING is not on the host and the host is not on the virtual machine.

In addition, the firewalls on both sides must be closed! Steps for Control Panel\ system and Security\ Windows Firewall\ Custom Settings

In the editor-virtual network editor of VM12, check to use the local DHCP. Check to see if the subnet IP address is correct. Maintain the virtual machine as a static IP to ensure stability.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.