Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, 6535 cloth, 6535b many people do not know, now let's take a look!

1. 6535b is a Hewlett-Packard series notebook with AMD dual-core processor. There are ten different notebooks, all equipped with integrated graphics cards. So, do you know the disassembly of HP 6535b notebook? When you need to clean the computer fan or replace and repair the computer hardware, you need to remove the HP 6535b. We can see that HP 6535b notebooks are tightly assembled and beautifully made. So, how can it be dismantled without causing damage? Next, let's take a look at Hewlett-Packard 6535b series notebooks and Benshaw's dismantling tutorials.

2. 6535b Hewlett-Packard disassembly tutorial disassemble keyboard

3. First of all, you need to remove the battery and then the keyboard. Open the three screws on the back and the four clips on the keyboard. After opening it, slowly lift the keyboard along the edge of the keyboard (remember to start at the top of the keyboard) and unplug the keyboard cable (remember to pull out the top clip first, be sure to do it slowly, otherwise the keyboard will be replaced if it is broken.) At this point, the keyboard is completely removed. The second is to open the touch bar of the machine key. Touch the gap between the two sides of the bar and remember that there will be three from the side. They are integrated and should be removed together. Remember to force evenly and notice that there will be two wires connected on the motherboard.) Touch the gap on both sides of the touch bar and press the touch bar evenly. Take your time. Don't worry. Unplug the two cables connected to the motherboard. Line 1 is the closest line to the keyboard line. The removal method is the same as the keyboard cable. No. 2 can be seen by lifting the touch bar. Disassembly method: pull it out vertically; at this point, the touchpad is removed.

4. 6535b introduction to HP disassembly tutorial

5. Loosen the screw, remove the cover, remove the Bluetooth module, disconnect the cable, and remove the Bluetooth. Unscrew the screw that holds the hard drive cover, remove the hard drive cover, grasp the polyester film label and pull up. Pick up the hard drive and come out. Uninstall the hard drive and remove the RTC battery. Unscrew the optical drive and remove it. Unscrew the memory cover, uninstall the WLAN wireless module and memory, disconnect the WLAN cable, unscrew, remove the WLAN module, and uninstall the memory.

6. 6535b Hewlett-Packard removal tutorial remove fan

7. Second, remove the fan of the HP 6535b laptop. Remove the two screws from the lower fan and slowly pull the fan out to the right. Be sure to be careful with the fan cable; unplug the fan cable and make sure it is pulled out slowly. Pay attention to the four color lines. You can pull it out from one side to the other during the pull-out process, so be careful, as this is the most troublesome part of the disassembly process. At this point, the fan is removed.

8. 6535b disassembly of heat dissipation plate in HP disassembly tutorial

9. In addition, it is the heat sink of HP 6535b notebook, made of copper and yellow. Remove the two screws and pull out the silver iron sheet on the plate to the right; remove the radiator: first slowly lift the radiator horizontally, and then pull it out to the right (notice where the radiator is connected to the fan on the left). Note: two boxy things under the heatsink are extremely important, one is CPU and the other is GPU. Now you can clean the dust on the fan and radiator.

10. Through the above introduction, I believe you have a certain understanding of the disassembly tutorial of HP 6535b series notebooks and the disassembly of all the important parts of HP 6535b series notebooks. HP 6535b series notebooks need some special tools to disassemble, and be careful when dismantling notebooks, lest damage to the parts lead to HP 6535b series notebooks malfunctioning or unable to report for repair. Here, Tuba Rabbit Shaw reminds you that disassembly is risky and needs to be carefully considered, as well as the installation sequence. After the radiator and fan are installed, we must test whether the machine can be turned on properly.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.