Shulou(Shulou.com)05/31 Report--

Many users find that there is always an inexplicable jitter in the mouse pointer when drawing with a quick CAD editor, and they can't control it. As a result, the efficiency of drawing is greatly affected, and it is very error-prone. Many people think that this is a problem with the configuration of the computer itself, but it is not. In fact, it is caused by the fact that you did not set it up carefully when using the software. here is how to solve it.

Reason 1: this may be caused by the capture command and grid command turned on by the software itself.

To turn off these two functions, click the format button on the toolbar at the top of the software. Find the drawing Units function in its drop-down box and open the settings window.

Then click [customization tool]-[drawing Settings], and select [coordinate input]. Uncheck the snap on and Grid Open selection boxes in the snap and Grid settings, and then make sure.

Of course, you can also turn these two functions on or off directly by pressing the keyboard shortcut "F9" and "F7". There is also a display of these two function icons at the bottom of the software, which you can use to determine whether the function is on or off.

Reason 2: the snap command and grid command settings are too large

If you want to open these two commands, it may be because the capture range of the setting is too large, reopen the settings window of the drawing unit, enable "snap and Grid" to set the snap X-axis spacing to "0.001", and click "OK".

The above two solutions are based on the rapid CAD editor itself to achieve, of course, it is impossible to rule out the reason is your mouse itself, please follow the following steps to solve.

1. Check whether the laser lens of the mouse has accumulated ash, and if so, clean it up.

2. See if your mouse pad also has ash or other impurities.

Please use the mouse on a flat desktop or on a thick mouse pad

4, in the control panel to open the mouse "Properties", when selecting the "pointer option", you can improve the accuracy of the pointer tick, and then try, if this option is not selected, the mouse will move inaccurately.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.