Shulou(Shulou.com)06/01 Report--

What are the solutions to some common and unusual problems in windows computers? in view of this problem, this article introduces the corresponding analysis and solutions in detail, hoping to help more partners who want to solve this problem to find a more simple and feasible way.

First of all, start no display

Because of the memory module, this failure is usually caused by bad contact between the memory module and the memory slot on the motherboard. Just wipe the rubber fingers back and forth with an eraser to solve the problem (do not use alcohol, etc.), or cause memory damage. Or a problem with the motherboard memory slot may also cause such a failure.

Because the memory module does not cause a memory failure, the host speakers will beep for a long time (for Award Bios).

Secondly, the Windows system is unstable and often produces illegal errors.

This failure is usually caused by the poor quality of memory chips or software. If it is determined that it is a memory stick, only replace it. Third, the Windows registry is often damaged for no reason, prompting the user to recover. This failure is usually caused by the poor quality of the memory stick and is difficult to repair. There is only one way to replace it.

Fourth, Windows often automatically enters safe mode

Such failures are usually caused by incompatible motherboards or memory modules. For some motherboards that do not support PC133 memory, which is commonly used in PC133 memory, you can try to slow down the memory read speed in the CMOS settings. Do not solve the problem, if not, only replace the memory module.

Fifth, random collapse pan-station group

This type of failure is generally due to the use of several different chips of memory chips, due to the speed difference of each memory strip, resulting in a panic, which can be resolved in the CMOS setting to reduce memory speed, otherwise, only the same type of memory is used. Another possibility is that the memory module is incompatible with the motherboard. This phenomenon is usually rare. In addition, this may be caused by the poor connection between the memory module and the motherboard, which is a common phenomenon.

6. As memory increases, system resources decrease.

This phenomenon is usually caused by the incompatibility between the motherboard and memory. For some motherboards that do not support PC133 memory modules, PC133 memory modules are common. Even if the system is reinstalled, the problem cannot be solved.

Seventh, when Windows starts, when loading the high-end memory file himem.sys, the system will prompt that there is something wrong with some addresses.

This problem is usually caused by damage to some chips in the memory stick. For a solution, see the following memory repair methods.

Eighth, memory tips are often used up when running some software.

This phenomenon is usually caused by the lack of space in the system disk. You can delete some useless files and leave some space. It is usually appropriate to keep about 300m.

Ninth, when booting from the hard disk to detect disk space, the system prompts that there is not enough memory. This type of failure is usually caused by the user adding the emm386.exe file to the config.sys file, and as long as it is masked, the problem can be solved.

In fact, the method of booting windows from a hard disk in DOS mode is more complex and slower. First, you must install the DOS file on your hard drive and configure the config.sys and autoexec.bat files. If the file configuration is incorrect, resulting in a series of unforeseen failures, it is impractical for beginners. Second, after successfully loading Windows, each time you boot the system, the config.sys and autoexec.bat files are loaded to drive the CD-ROM drive, thus prolonging the system startup time. If config.sys and autoexec.bat are blocked under Windows. Sometimes the optical drive does not work properly. x. An illegal error occurred while installing Windows into the system configuration.

This failure is usually caused by damage to the memory stick and can be resolved by memory repair. If not, only replace the memory stick.

XI, which automatically restarts many times when the system starts the window.

These failures are usually caused by quality problems with memory modules or power supplies. Of course, the system restart may also be caused by poor CPU cooling or other man-made failures. Therefore, use only the exclusion method to gradually eliminate it.

Twelve, a method of memory repair

After the above failures, if the memory is damaged or the quality of the chip is not good, if this condition is not allowed, you can use a soldering iron to remove the chip on the memory side to see if the problem can be solved. If the chip on the other side cannot be replaced before success. The welder is only afraid of the man who wants to repair the mobile phone. Of course, if you use an oscilloscope to detect it, you can get twice as much results with half the effort. After using this method, only half of the memory is available because one chip of the memory has been deleted. For example, 64m and 32m are available. For this reason, for small capacity memory. No maintenance required.

The answers to some common and unusual problems about windows computers are shared here. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel for more related knowledge.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.