Shulou(Shulou.com)06/01 Report--

Zabbix configuration file details

Zabbix configuration files generally have three types:

zabbixserver configuration file zabbix_server.conf

zabbixproxy configuration file zabbix_proxy.conf

zabbix_agentd configuration file zabbix_agentd.conf

1. Configuration file for zabbixserver:

NodeID=0 #Distributed node ID number, 0 means independent server, default is commented out, no mandatory configuration

ListenPort=10051 #zabbix server port, default is 10051, can modify itself,

The range is 1024-32767, generally the default can be

SourceIP= #Source IP address of the connection, default is null, default is OK

LogFile=/tmp/zabbix_server.log #Log file location

LogFileSize=1 #Log file size in MB, when set to 0, means not only line log polling,

Default setting is 1, default is OK

DebugLevel=3 #Specify debug level, default is OK

PidFile=/tmp/zabbix_server.pid #pid file location

DBHost=localhost #database host name, when set to localhost, connect to mysql via sock

DBName=zabbix #Specifies the name of the database where zabbix data is stored

DBUser=zabbix #Specifies the username of the connection database

DBPassword=123456 #Password required for user to connect to database

DBSocket=/var/lib/mysql/mysql.sock #Host set to localhost, user

The sock location used to connect to the database,

DBPort=3306 #The port number of the database. It doesn't matter when connecting with sock. It needs to be set when connecting through network.

StartPollers=5 #Default

StartIPMIPollers=0 #Parameters used when IPMI is used

StartTrappers=5 #Number of open processes,

StartPingers=1 ditto

StartDiscoverers=1

StartHTTPPollers=1

JavaGateway=127.0.0.1 #IP address or hostname of JavaGateway

JavaGateway Port =10052 #Port number of JavaGateway

StartJavaPollers=5 #Number of processes opening javagatey connections

SNMPTrapperFile=/tmp/zabbix_traps.tmp

StartSNMPTrapper=0 #If set to 1, the snmp trapper process starts

ListenIP=0.0.0.0 #Listen for ip addresses from trappers

ListenIP=127.0.0.1

HousekeepingFrequency=1 #zabbix Frequency at which Housekeeping is performed, in hours

MaxHousekeeperDelete=500 #Delete up to rows of historical data at a time

SenderFrequency=30 #zabbix Time in seconds to attempt to send an unsent alert

CacheSize=8M #Size of cache

CacheUpdateFrequency=60#Time to update cache configuration in seconds

StartDBSyncers=4

HistoryCacheSize=8M

TrendCacheSize=4M

HistoryTextCacheSize=16M

NodeNoEvents=0

NodeNoHistory=0

Timeout=3

TrapperTimeout=300

UnreachablePeriod=45

UnavailableDelay=60

UnreachableDelay=15

AlertScriptsPath=/usr/local/zabbix/shell #path where scripts are stored

FpingLocation=/usr/local/sbin/fping #Absolute path of fping directive

SSHKeyLocation=

LogSlowQueries=0

TmpDir=/tmp

Include=/usr/local/etc/zabbix_server.general.conf

Include=/usr/local/etc/zabbix_server.conf.d/ #Subconfiguration file path

StartProxyPollers=1 #Use this parameter in zabbix proxy passive mode

ProxyConfigFrequency=3600#Same as above

ProxyDataFrequency=1

zabbixagentd's profile

PidFile=/tmp/zabbix_agentd.pid #pid file location

LogFile=/tmp/zabbix_agentd.log #Log file location

LogFileSize=1 #Polling when log file size is reached

DebugLevel=3 #Log Information Level

SourceIP= #Source IP address of the connection, default is empty, you can

EnableRemoteCommands=0 #Allow zabbix server-side remote commands,

0 means not allowed,

1 is allowed.

LogRemoteCommands=0 #Turn on logging shell commands as warnings 0 means not allowed, 1 means allowed

Server=127.0.0.1 #zabbix IP address or host name of server, multiple can be listed at the same time, separated by commas

ListenPort=10050 #Port on which zabbix agent listens

ListenIP=0.0.0.0 #ip address where zabbix agent listens

StartAgents=3 #zabbix agent Number of open processes

ServerActive=127.0.0.1 #Enable proactive checking

Hostname=Zabbix server#The hostname specified in the zabbix server front-end configuration should be the same, the most important configuration

RefreshActiveChecks=120 #Time to actively check refresh, in seconds

BufferSend=5 #Time to buffer data

BufferSize=100 #zabbix agent Size of the data buffer, when this value is reached all data will be sent to zabbix server

MaxLinesPerSecond=100 #zabbix agent largest data row sent to zabbix server

AllowRoot=0 #Allow zabbix agent to run as root

Timeout=3 #Set the time to process timeout

Include=/usr/local/etc/zabbix_agentd.userparams.conf

Include=/usr/local/etc/zabbix_agentd.conf.d/ #path containing child configuration files

UnsafeUserParameters=0 #Allow all character parameter passes

UserParameter= #Specify user-defined parameters

zabbixproxy profile

Server=192.168.70.133#Specify the ip address or hostname of zabbix server

Hostname=zabbix-proxy-1.35 #Defines the host name of the monitoring proxy, which needs to be the same as the node name specified when configuring zabbix server frontend

LogFile=/tmp/zabbix_proxy.log #Specify the location of the log file

PidFile=/tmp/zabbix_proxy.pid #Location of pid file

DBName=zabbix_proxy #Database name

DBUser=zabbix #Users connected to the database

DBPassword=123456#Password of the user connecting to the database

ConfigFrequency=60 #zabbix proxy Frequency of fetching configuration data from zabbix server

DataSenderFrequency=60 #zabbix proxy Frequency of sending monitored data to zabbix server

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.