Shulou(Shulou.com)06/01 Report--

NU service shunting configuration:

Configure the traffic template.

Because VoIP, IPTV and Internet are connected through the same port, it is necessary to set 802.1p priority for each service. The general priority is sorted by Internet service, IPTV and VoIP from low to high. Set the traffic template index number here respectively

The priority of 7, 8, and 9802.1p is 0, 4, and 6, respectively.

Huawei (config) # traffic table ip index 7 name internet cir 10240 priority 0 priority-policy local-Setting

Huawei (config) # traffic table ip index 8 name iptv cir 10240 priority 4 priority-policy local-Setting

Huawei (config) # traffic table ip index 9 name voip cir 10240 priority 6 priority-policy local-Setting

Create a VLAN.

Create VLAN 100103, where VLAN 101is a multicast VLAN.

Huawei (config) # vlan 100103 smart

It will take several minutes, and console may be timeout, please use command

Idle-timeout to set time limit

Are you sure to add VLANs? (YBO) [n]: y

The total of the VLANs having been processed is 4

The total of the added VLANs is 4

Join the uplink port.

Add the uplink port 0Uniqq1 to the VLAN.

Huawei (config) # port vlan 100-103 the VLAN of the uplink port of the ONU device must be the same as the VLAN of the uplink device access port

It will take several minutes, and console may be timeout, please use command

Idle-timeout to set time limit

Are you sure to add standard port (s)? (YBO) [n]: y

The total of the VLANs having been processed is 4

The total of the port VLAN (s) having been added is 4

Create a business virtual port.

Create service virtual ports with index numbers of 2, 3 and 4 respectively, corresponding to user-vlan of 2, 3 and 4, respectively, and traffic flow templates of 7, 8 and 9, respectively.

Huawei (config) # service-port 2 vlan 100 eth 0 tx-cttr 1 multi-service user-vlan 2 rx-cttr 7 tx-cttr 7

Huawei (config) # service-port 3 vlan 103 eth 0 multi-service user-vlan 1 multi-service user-vlan 3 rx-cttr 8 tx-cttr 8

Huawei (config) # service-port 4 vlan 102 eth 0 tx-cttr 1 multi-service user-vlan 4 rx-cttr 9 tx-cttr 9

Description:

At this point, the configuration of the Internet/VoIP service is completed, and the next step is the multicast configuration of the IPTV service.

Configure multicast data.

Configure multicast VLAN and multicast mode.

Huawei (config) # multicast-vlan 101

Huawei (config-mvlan101) # igmp mode proxy

Are you sure to change IGMP mode? (yPay) [n]: y

Configure the multicast uplink.

Huawei (config-mvlan101) # igmp uplink-port 0Action0Action1

Configure multicast programs.

Huawei (config-mvlan101) # igmp program add name program1 ip 224.1.1.1 sourceip 10.10.10.10

Configure multicast users.

Huawei (config-mvlan101) # btv

Huawei (config-btv) # igmp user add service-port 3

Huawei (config-btv) # multicast-vlan 101

Huawei (config-mvlan101) # igmp multicast-vlan member service-port 3

Save the data.

Huawei (config-mvlan101) # quit

Huawei (config) # save

Operation result

After the configuration of the relevant uplink and downlink equipment is completed, the three types of services on the 0Universe one port can be used normally.

Use PPPoE dialing software on PC to dial. After dialing successfully, the user can access the Internet network.

VoIP users can talk to each other normally.

IPTV users: 0ram 1amp 1 port users can watch the program program1.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.