Shulou(Shulou.com)06/01 Report--

Tianrongxin firewall, no certificate is required.

Login address: https://192.168.1.254

User name: superman

Password: talent

Technical support Hotline: 8008105119

Tianrongxin firewall, no certificate is required.

Login address: https://192.168.1.254 8080

User name: superman

Password: talent! twenty-three

When you encounter a device, you need to back up the configuration of the old equipment, and then pour in the new equipment.

Login based on console port, user name and password are the same as web interface.

System config reset

Clear configuration

Save save

Lenovo Firewall, requires a certificate (preferably login with an IE browser)

Login address: https://10.1.5.254:8889

User name: admin

Password: leadsec@7766, administrator, bane@7766

Technical support Hotline: 4008107766

010-56632666

Convinced of the firewall (note that the security device management address is not unique)

Https://10.251.251.251

Https://10.254.254.254

User name: admin

Password: admin

Technical support Hotline: 4006306430

Enlightened stars

Https://10.1.5.254:8889

User name: admin

Password: bane@7766

Https://10.50.10.45:8889

User name: admin

Password: admin@123

Computer-side IP:10.50.10.44/255.255.255.0

Technical support Hotline: 4006243900

Juniper

Login address: https://192.168.1.1

User name: netscreen

Password: netscreen

Cisco

Login address: https://192.168.0.1

User name: admin

Password: cisco

Huawei

Login address: http://192.168.0.1

User name: admin

Password: Admin@123

H3C

Login address: http://192.168.0.1

User name: admin

Password: admin

Technical support Hotline: 4006306430

Green League IPS

Https://192.168.1.101

User name: weboper

Password: weboper

Configuration restart takes effect

Internet god firewall GE1 port

Https://10.50.10.45

User name: admin

Password: firewall

Technical support Hotline: 4006108220

1 restart the firewall, when "Press Ctrl+B to enter main menu..." appears When prompted by Ctrl+B;, the system will ask for a password, which defaults to O&m15213

After entering the 2 password, we will go to the main menu; if we do not need to keep the firewall configuration, we can choose 6 to restore the default value, then press 1 to confirm recovery, and then press 1 to start the system, so that the firewall will directly restart and restore the default value.

3 but we need to save the original configuration this time, so choose 2 to modify the startup program and configuration.

4 Select 1 and confirm to modify the configuration

5 start the program to keep the default, just press enter.

6 then follow the prompts to enter "." at selecting the startup configuration file. Number, enter, to start from the default value.

7 after returning to the main interface, we type 1 again to let the system start according to the settings we just set.

8 the system will then restart according to the factory default value, and after the boot is successful. We first configure the network port of the computer to obtain automatically and connect to the MGMT port of the firewall. After obtaining the address, log in to the system with https://192.168.0.1:8443. The account defaults to admin and the password defaults to Admin@123. After logging in successfully, follow the system prompts to change the password of admin, the new password must meet the password security requirements, require case, special symbols, and numbers, and the length should be greater than or equal to 8 digits.

A) after logging in to the system, we launch a quick wizard; click "system"-"profile Management"-"next launch profile", check the previous configuration file, and click "download".

B) after the configuration file is downloaded (here we can read the previous configuration), we log in to the device from the console port again, copy the command to change the admin password (ciphertext), and type:

9 system-view

10 aaa

11 display this finds the same password under manager-useradmin and copies it; the password corresponding to this line is the password we configured when we first initialized the configuration.

A) after the new password corresponding to admin is copied, we open the newly downloaded configuration file in text mode (no need to decompress it). In aaa mode, replace the line password under manager-useradmin, and save the configuration.

B) after the configuration modification, we go back to the configuration interface. Let's delete the original vrpcfg.zip file first. Then upload our modified configuration file and click on the icon in the small light bulb to set the configuration file to take effect next time.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.