Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions for everyone, ZTE u880 brush machine, ZTE u880 brush machine many people still do not know, now let us take a look!

Mobile phone brushing has become a trend that many people want to pursue. Everyone wants their mobile phone to be personalized and novel. Many people use the brush to update the mobile phone system and upgrade the mobile phone configuration. But brush has a lot of advantages and disadvantages, can not blindly brush. Brush can solve some minor problems with mobile phones, but frequent reliance on brush is likely to affect mobile phones. Let Bian Xiao introduce you to the step-by-step tutorial of ZTE u880s brush machine!

Note:

1. After installing the driver, you must brush the machine, otherwise it may change bricks!

2. Please look at the version of your phone before brushing (below I teach you how to see)

3. Brush machine risk, but as long as the driver is installed, according to this tutorial basic will not have problems.

Steps:

1. Backup address book

2. Install [U880s Driver] under [Brush Tools] folder on XP system PC.

3. Turn off the phone, remove the battery, keep the volume button pressed, and connect the data cable to the computer. During this period, the volume key cannot be released. The volume key can only be released when the phone displays the following blue screen interface.

4. At this time, the computer will detect the phone and install its own driver. Wait until the following interface appears in the lower right corner of the computer, prompting [Hardware has been successfully installed, can be used normally] and then unplug the data cable. (If no phone is detected, repeat step 3 several times, or replace USB port or restart computer)

5. Open [Brush Tool.exe] in the [Brush Tools] folder on the XP computer.

6. Click [Select Version] in the middle of the brush software interface and select the brush package you downloaded, that is, the file with suffix. Bin.

7. Then right click [Download] on this path to download, and the progress bar of [Download Speed] will start to jump.

8. Download time is approximately 5 minutes. Download speed 100%. After the download status shows [Download Success], you can unplug the phone.

9. Install the battery and start it normally. The first boot is slow, about 5-10 minutes. After successful boot, it means successful brush machine.

Note:

The phone doesn't have batteries. Connect your phone to your computer via a data cable. (The phone plugs into the computer and turns into a blue screen interface.) If the blue screen does not appear in the 30S, unplug the phone. Then hold down the volume key and connect to the computer via the data cable. During this period, you cannot release the volume key. After a while, the blue screen interface appears and you can release the volume key.) At this time, the first line of the brush software will appear green font [Insert] prompt, when the blue font appears [please right-click (if there is no blue font [please right-click this way to download], you can unplug the phone and plug it back into the computer).

The above is a detailed description of the steps of ZTE U880S brush machine. The steps of brushing the machine are relatively simple and easy to understand, suitable for small partners to operate at home. However, before you brush, you should carefully read the brush preparation work. There are some precautions to brush the machine. The first boot time after brushing may take a little longer. Don't worry. Just be patient. Finally, edge Xiao would like to remind everyone, brush machine must be cautious, do not be too blind.

This article is finished and I hope it helps everyone.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.