Shulou(Shulou.com)06/02 Report--

MDT deployment architecture DHCP+DNS+MDT/WDS+Client 1) WDS and MDT are deployed on a server; 2) each of the above machines is deployed in different network segments; configure BIOS to start

The scope configuration of DHCP office network segment is as follows:

066 startup server hostname: WDS server IP 067 startup file name: boot\ x64\ wdsnbp.com

Description: this configuration mode only supports BIOS startup mode.

Configure UEFI startup

Add the WDS server IP to the route or core switch for forwarding broadcasts (operated by the network partner), roughly configured as follows:

Interface Vlan12 / / PC client office vlan description Network ip address X.X.15.254 255.255.252.0 / / X.X.15.254 is the 12-segment gateway ip access-group PublicOffice in ip helper-address X.X.63.60 / / WDS server IP ip helper-address X.X.63.42 / / DHCP server IP

Note: after configuring as above, cross-segment PC can be started normally through UEFI (including UEFI+SECURE ON)

UEFI startup can also be done normally (unverified) through relevant configuration in the DHCP scope. The link is as follows:

Https://marconuijens.com/2018/01/04/supporting-both-legacy-and-uefi-modes-in-your-sccm-environment/?tdsourcetag=s_pctim_aiomsg

Refer to the link above:

Https://blog.51cto.com/mikeyoo/1978356

Https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc732351(v=ws.10)#directing-a-client-to-the-appropriate-network-boot-program

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.