Shulou(Shulou.com)06/02 Report--

Requirements: configure PC1 and PC3 to be the same VLAN,PC2 and PC4 as the same VLAN, and communicate with VLAN

1. Open the switch LSW1 to enter the system view and change its name to S1

two。 Create VLAN5 and VLAN10

3. Verify that the vlan is created successfully

4. Enter the ETHERNET1 port view to configure the ACCESS port, and then add the port to the VLAN10

5. Verify that the configuration is successful

6. Go to the ETHERNET2 port view, configure it as ACCESS, then add the port to VLAN10, and verify

7. Enter the ETHERNET3 port view and configure as TRUNK port, and allow VLAN5 and VLAN10 to pass through

8. Verify that it is successful

9. Switch LSW2 configures and verifies the port as described above

After configuration, verify that it meets the requirements

PC1 is connected with PC3.

PC1 can't communicate with PC2.

PC2 is connected with PC4.

PC2 can't communicate with PC3.

After testing, the configuration is correct and meets the requirements of PC1 and PC3 in the same VLAN,PC2 and PC4 in the same VLAN.

The experiment is over

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.