Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

How to install xp computer stereo

2025-01-21 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >

Share

Shulou(Shulou.com)05/31 Report--

This article mainly introduces the relevant knowledge of "how to install xp computer audio". The editor shows you the operation process through an actual case. The operation method is simple, fast and practical. I hope this article "how to install xp computer audio" can help you solve the problem.

1. Check the front panel of the mainframe

Because the small speaker has to be connected to the mainframe of the computer in order to be effective, it is necessary to first move the mainframe out and check the front and rear panels of the interface on the computer. In addition to the boot key, the front panel usually has two small round holes, green and pink, which are used to connect the stereo and the pink round holes are used to connect the microphone.

two。 Check the rear panel of the mainframe

There are many jacks in the rear panel of the mainframe, and it looks very complicated. But all we have to do is find the most critical audio Jack. Rule out other jacks of different shapes and find the bottom row of three or two rows of six jacks. There you can see the same two round jacks as the front panel, green and pink, the green round hole is used to connect the stereo, and the pink round hole is used to connect the microphone.

3. Put the stereo on the table and plug the audio cable into the integrated sound card connector of the motherboard.

4. Connect the computer and the stereo with the data cable that was configured when you bought the computer's small speakers. The one-to-two data cable is plugged into the green Jack of the computer with a single head, and the two ends are connected to the input Jack of the stereo, paying attention to the left and right channels. For an one-to-one data cable, just plug one end of the data cable into the computer green Jack and the other end into the audio input Jack.

The computer is turned on and the audio equipment is connected. Just adjust the sound effect yourself.

This is the end of the introduction about "how to install xp computer stereo". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Internet Technology

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report