Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, Hewlett-Packard printer cartridge installation tutorial, HP printer cartridge installation many people do not know, now let's take a look!

At present, with people's higher and higher requirements for office work, printers have become the most common office equipment in our office. Installing a printer is a simple operation for people who understand computers, but for people who are not familiar with it, there are sometimes hundreds of problems. This article takes the Hewlett-Packard printer as an example to introduce the printer installation tutorial and how to use it!

First, install the printer

Step 1: remove the printer from the box.

Remove the printer from the box and remove all tape, self-adhesive labels, and packaging materials from the printer.

1. Take the printer out of the box.

two。 Tear off all tape and packaging materials outside the printer and open the outer door.

3. Remove the tape and packing material from the ink cartridge inspection door.

4. Open the inspection door of the ink cartridge, then tear off the tape and remove the cartridge from the printer.

5. Open the box and remove the ink cartridge, power cord, and USB cable.

6. Connect one end of the power cord to the back of the printer, and then connect the other end of the power cord to the power outlet.

7. Press the power button to turn on the printer.

Step 2: install ink cartridges.

Install the HP ink cartridge in the printer cartridge.

1. The printer completes the boot process, and then moves the tray to the center of the printer. Wait for the printer to be completely idle and stop making noise, and then continue.

two。 Remove an ink cartridge from the package. Note that you can only touch the black plastic part of the ink cartridge.

3. Pull up the orange label and tear off the protective tape.

4. Pinch the new cartridge, tilt it up slightly, slide it into the empty cartridge slot, and then gently push the cartridge up and into place. The tricolor cartridges are installed in the left slot. Insert the black ink cartridge into the correct slot.

5. Repeat to install other ink cartridges.

6. Close the ink cartridge service door.

7. Close the outer hatch.

Step 3: load the paper into the feed tray.

After removing the printer from the box, put the plain white paper into the input tray.

1. Lift the feed tray.

two。 Slide the paper width guide completely to the left.

3. Put the plain white paper into the input tray and slide down the entire stack of paper until it stops.

4. Slide the paper width guide to the right until it clings to the edge of the paper.

5. Pull out the tray and lift the tray extension board.

Second, connect the printer

1. Click Wireless Network button 1 on the printer.

2. Open the browser in the computer and enter the URL: 123.hp.com/DJ4729 in the address bar to enter the main interface of the official HP website.

3. Enter your device model number: 4729 in the search box on the main interface, select the specific printer model that appears in the drop-down list, and click search.

4. Click the download button to download the printer driver.

5. Double-click to open the download driver, and click continue.

6. Click "connect new devices".

Click "Wireless-establish a wireless connection to the device", and click next.

8. Now take out the USB cable in the printer box and connect the printer to the computer.

9. At this point, the driver will check the network environment, please wait.

10. Select "Yes, access your computer or router" and click next.

At this time, the system has automatically connected the printer to the wireless network, select "Yes" and click next.

12. Unplug the USB cable that connects the printer to the computer, and click next.

13. Click "main uses of equipment" and fill in the zip code, and click next.

14. At this point, you can click "Skip inactivation" in the lower left corner.

15. Congratulations! Setup is complete.

16. At this time, the small light on the right side of the wireless network will remain on, and the computer and printer will be connected wirelessly.

How to use Hewlett-Packard printers

Cloud printing

1. Press the cloud print button on the printer once, wait and see that the small light on the right side is always on, and the cloud print function is turned on.

2. tap the information button on the printer, and the printer will automatically print an information page containing an e-mail address.

3. On the information page spit out by the printer, you will see the mailbox address of the printer

4. At this time, anywhere in the world, send the job to be printed to the mailbox address of the printer (email attachment) the printer can print directly.

5. But if you want to make the printer's mailbox prefix easier to remember, please visit www.hp.connected.com and click the "create account" button

6. Enter your name, register your email address, and create a HP account

7. At this point, you need to enter the application code, which is the prefix of your printer email address. If your printer email address is "[emailprotected]" on the information page, then your application code is "abcd" (please refer to your printed information page).

8. Click the plus sign on the page to reset the email address

9. Please enter the email prefix you want to use and click submit

10. The email address of your printer has been changed successfully.

Use HPSmart for printing

1. Print photos from mobile phones and tablets

Step 1: open APP and click to print photos

Step 2: select the photos to print

Step 3: click the adjustment button in the upper right corner to adjust the color and size

Step 4: here you can adjust the color options and print quality

Step 5: here you can resize the printed picture

Step 6: click the print button to start printing.

2. Print the manuscripts in the hand and in the tablet

Step 1: click the file in the dialog box

Step 2: open the file

Step 3: click the button in the upper right corner of the file and select "Open with other applications"

Step 4: you can select "copy to HPSmart" and the printer will print directly. Or select Save to File, and then open the HPSmart program to find the file to print

Step 5: if you select "Save to File", you need to open the HPSmart program again and click on the File column.

Step 6: find the file you just saved and need to print

Step 7: click the print button to print, or select the upper right corner adjustment key, select the number of copies to print, page number range, print quality, paper size and so on to adjust.

3. Print the documents in QQ

Step 1: click the file you want to print and open it

Step 2: click in the upper right corner. Button and click the print button to print

Step 3: select the number of copies to print and the range of pages.

The above is about how to install Hewlett-Packard printer, I hope it can be helpful to everyone!

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.