Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, why Gauss headphones are so cheap, many people do not know, now let's take a look!

1. The sound quality of good headphones will be full of beauty and can be better devoted to music. Whether it is business trip or shopping, it can be a kind of enjoyment. However, when inferior headphones or headphones break down, it will become noise, not only can not hear protoplasm music, but also damage our ears for a long time. Here, take the Gauss headset as an example to illustrate how to repair it in the event of a failure.

2. When repairing Gauss headphones, it needs to be analyzed according to different conditions. One of the most common situations is that one headset can hear it and the other can't. At this point, it may be a failure in the internal wiring of a single headset, or a burnt out of the internal voice coil. First, check to see if the outside of a single headset that cannot hear sound is clamped or hung up, causing the middle circuit to be cut off. If not, it is caused by the burnout of the voice coil inside the headset. At this time, gently remove the earphone head, and then use the electric iron to weld the damaged wires inside the ear. If the welding is not good, when you need to replace the wire, because the Gauss headphones belong to the category of medium-and high-grade headphones, and if the wire you are looking for is too inferior, even if you change it, the sound quality will affect the sound effect of the headphones. Therefore, we must choose high-quality wire. If you can't handle it yourself, you can find a professional repairman to replace it, which ensures the sound effect of the headphones.

3. In addition, sometimes the ear will make noise or break tone, usually in high frequency or low frequency. This is due to personal operation reasons, the headset volume is turned on to the maximum for a long time, which causes the magnet to shift when the headset is overloaded. At this time, you only need to set the voice to a lower position, and it will return to normal after a period of time. The noise occurs because the voice coil inside the headset touches the edge of the magnet.

Sometimes the headphones are good and bad, and the left and right headphones are out of balance. Generally speaking, this kind of fault is caused by the internal problems of the headphone unit. At this time, the headset should be taken apart first. Sometimes it may be because the connection between the headphone unit and the wire is often plugged in and unplugged, resulting in the metal spring being magnified, making bad contact and producing intermittent sound.

5. If you are not sure which part of the headset has a problem when using it, you can plug the headset into the computer first. If the headphones work properly, there may be something wrong with the device you are using, not the headphones. If you are using a computer, it is also possible that the headphone is plugged in incorrectly, or the volume of the computer is muted, so that the headset cannot hear the sound.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.