Shulou(Shulou.com)05/31 Report--

This article mainly explains "what is the backup and restore method of Exalogic Ethernet switch configuration". Interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Next let the editor to take you to learn "what is the backup and restore method of Exalogic Ethernet switch configuration"?

Backup

PC > ping 10.135.162.152 / / first ping the switch to make sure that the connection with the switch is the same

Pinging 10.135.162.152 with 32 bytes of data:

Request timed out.

Reply from 10.135.162.152: bytes=32 time=0ms TTL=255// prompts ping

Reply from 10.135.162.152: bytes=32 time=1ms TTL=255

Reply from 10.135.162.152: bytes=32 time=0ms TTL=255

Ping statistics for 10.135.162.152:

Packets: Sent = 4, Received = 3, Lost = 1 (25% loss)

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 1ms, Average = 0ms

PC > telnet 10.135.162.152 / / remote login with telnet

Trying 10.135.162.152... Open

User Access Verification

Password: / / enter the telnet login password:

SW1 > enable / / enter the switch

Password: / / enter the entry password:

SW1#copy running-config startup-config / / overwrites the running configuration file over the startup configuration file. (save the configuration made by the switch. )

Destination filename [startup-config]? / / specify the target file [default is startup-config]

Building configuration...

[OK]

SW1#copy running-config TFTP / / Save the running configuration file (switch configuration) to the FTP server

Address or name of remote host []? 10.135.20.72 / / specify the address of the remote FTP server

Destination filename [SW1-confg]? Dm01sw-adm01-config / / specify the file name saved to the FTP server

Writing runningwi config.

[OK-1059 bytes]

1059 bytes copied in 3.005 secs (0 bytes/sec)

SW1#

two。 Reduction

Switch#

Switch#config t

Enter configuration commands, one per line. End with CNTL/Z.

Switch (config) # int vlan 1 / / enter VLAN1

Switch (config-if) # ip add

Switch (config-if) # ip address 192.168.1.1 255.255.255.0 / / configure the VLAN1IP address

Switch (config-if) # no shutdown / / launch takes effect

Switch (config-if) #

% LINK-5-CHANGED: Interface Vlan1, changed state to up

% LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

Switch (config-if) # exit

Switch (config) # exit

Switch#

% SYS-5-CONFIG_I: Configured from console by console

Switch#copy TFTP startup-config / / copy the files on FTP to the startup configuration file

Address or name of remote host []? 10.135.20.72 / / the address from FTP is 10.135.20.72

Source filename []? Dm01sw-adm01-config / / dm01sw-adm01-config file from FTP

Destination filename [startup-config]? / / specifies that the stored object file is the default startup-config

Accessing t ftp://10.135.20.72/dm01sw-adm01-config....

Loading dm01sw-adm01-config from 10.135.20.72:!

[OK-1059 bytes] / / copied successfully.

1059 bytes copied in 3.016 secs (351bytes/sec)

Switch#

At this point, I believe that everyone on the "Exalogic Ethernet switch configuration backup and restore method is what" have a deeper understanding, might as well to the actual operation of it! Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.