Shulou(Shulou.com)05/31 Report--

This article mainly shows you the "solution to the broken computer hard disk". The content is simple and clear, and I hope it can help you solve your doubts. Let the editor lead you to study and learn the solution to the broken computer hard disk.

First, after the computer is powered on, it is prompted that the system disk has not been found:

1. It is easier to deal with the bad logic of the computer, which is usually shown in the disk scan action or the hint that the system disk is not found after the computer is powered on, or that the file cannot be found or executed error when you are running the system.

2. In this case, you usually open my computer directly, select the hard disk you want to repair, open the menu, and select Properties.

3, switch directly to the toolbar window, under the error check, click "start check".

4. An option window will pop up directly, prompting "automatically fix file system errors" and "scan and attempt to recover bad sectors". After checking the two boxes, scan and restore them by clicking "start". If the system is 0, then the scan and repair will be started after rebooting.

5, if the computer can not enter the system, you can use tools such as DISKGENIUS to delete the system disk, and then reinstall the system.

Second, the computer has a bad hard disk:

1. The main symptom is a slow start, especially in the WINDOWS scroll bar or when entering the system, otherwise it is fast and sometimes slow.

2. You usually have to wait a few minutes or more than ten minutes when copying files. Sometimes there will be redundant errors in the middle of the file copy, and in a more serious case, the lower right corner prompts that the file is missing or cannot find the partition in which it is located.

3. If some symptoms of bad hard disk are found, which are usually physical bad, before the hard disk is completely broken, we must back up the hard disk data in time.

III. Other failures

In general, in addition to the two cases of bad logic and bad hardware, there are some more serious bad phenomena, such as the abnormal noise of the hard disk during operation and the friction sound of the hard disk becomes a strange sound.

Fourth, protect errors during formatting or installation:

When formatting the hard disk, it will stop or report an error all the time, it will also report an error or install slowly when installing the system, and it will also report an error when the hard disk is partitioned. This kind of situation is the hard disk bad road is more serious, we should pay attention to it.

Fifth, the solution to the occurrence of logical bad track and hardware bad track on hard disk:

1. If you are not sure if there is a bad path on your computer, you can use the built-in DISKGENIUS partition tool in the quick-start pe system to detect the bad path, or plug the hard drive to another computer and use the partition tool to detect it.

2. If it has been determined that there is a bad path in the computer, back up the data on the hard disk first, if the bad path of the hard disk is not serious, you can copy it quickly, and if the bad path of the hard disk is serious, the data is prone to crash or interruption in the copying process. We should pay attention to it.

3, the emergence of hard disk bad track can be repaired with repair tools, generally speaking, most of the physical bad road can not be repaired successfully with tools, which will speed up the damage of the hard disk.

4. Some partners plan to copy it in its entirety, which will lead to repeated misreading and eventually fail.

5, Xiaobian to share with you reliable methods, after finding that the hard disk is bad, directly shut down the computer, power off, remove the hard disk, as from the disk to other computers.

6, the computer starts up, one by one files are copied separately, and if you can't copy them, you will give up because there may be bad ways here.

7. After copying the data, you want to block the bad road or use tools to repair the bad road, but if you are physically bad, it is no longer recommended to continue to use it, otherwise it is easy to cause data loss.

8. After copying the data, you can either block the bad path or repair it, but it is not recommended to continue to use it for security reasons. There is another situation, that is, you can't even copy the data in the previous step, but the data is very important.

9. There is also a situation where you encounter important data, but you can't get it out of the exam. Is to wrap the hard disk layer by layer with plastic wrap, freeze it in the refrigerator, and then take it out and hang it on another machine for handcuffing, but you can only use it once. If you can't finish the handcuffing this time, the hard drive will be useless and be used with caution.

10. So if you think the data is important, you need to send it to a professional data recovery center for processing, but the disadvantage is that the price is expensive. To remind you that the hard drive is bad and the data is not important, you can repair it yourself. If the data is important, you still need to find a professional to repair it.

The above is all the contents of this article entitled "the solution to the broken computer hard disk". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.