In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-04-03 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >
Share
Shulou(Shulou.com)05/31 Report--
This article mainly introduces the relevant knowledge of "what is the method of changing memory hard disk for notebook computer". The editor shows you the operation process through an actual case. The operation method is simple, fast and practical. I hope this article "what is the method of changing a notebook computer for a memory hard disk" can help you solve the problem.
If you want to replace the memory and hard disk, the first thing to do is to dismantle the machine, but because different brands and models are different, the process of dismantling the machine is not the same.
Today's machine dismantling tutorial takes Hewlett-Packard Star 14 lightweight book as an example, this product is a very standard mainstream lightweight product, with a high representative.
Hewlett-Packard Star 14 thin book after removing the rear shell
After dismantling the machine, we can see that the HP Star 14 lightweight version has a SO-DIMM memory slot and an M.2 solid-state drive slot, with a 2.5-inch hard drive installation space in the lower left corner. Some models of Hewlett-Packard Star 14 lightweight books also have solid-state drives and mechanical hard drives, which can provide high-speed reading and high-capacity storage. And as can be seen from the figure, the design of its double heat pipe and double fan is also very reliable, which can greatly enhance the heat dissipation capacity.
SO-DIMM memory slot
The middle position on the left side of the back of the fuselage is the location of the memory. The SO-DIMM memory slot is easy to disassemble and install. The memory is fixed in the slot through the buckles on both sides. If we move the buckle to both sides at the same time, the memory will break off and pop up, and then we can pull out the memory.
The memory that pops up after unlocking the buckle
The steps to unplug the memory are relatively simple and not particularly noteworthy, but rookies need to pay attention to when installing memory. When installing the memory, you need to insert the slot from the angle in the picture above. You should pay attention to whether the memory is plugged in tightly. Some novice friends will not dare to use force for fear of damaging the hardware. Once the memory is not fully inserted, there is a risk of short circuit on the computer.
The gold finger (contact) of the memory has a dull-proof design.
Memory bars are designed to prevent insertion, but there are still some friends who believe in "strong miracles" and forcibly insert the memory upside down. I suggest that everyone should not use it here even if they are strong. Tuhao took it as if I didn't say it.
After talking about memory, we will teach you how to install the M.2 interface solid state disk.
Installed M.2 solid state disk
The most mainstream M.2 interface solid state drive is the 2280 specification in the figure. In addition, there are 2242, 2260 and 22110 specifications. The difference between them is the length of the PCB board, but these three specifications can hardly be seen in laptops today.
After unscrewing the screw, the hard disk will pop up.
After unscrewing the tail of the M.2 solid state drive, the hard drive will tilt up like the memory stick, and you just need to unplug it. In fact, the difference between hard disk and memory is that one is fixed with a buckle and the other with a screw.
The gold finger (contact) is designed with an anti-dumb mouth.
M.2 solid state disk installation considerations and memory are the same, it is also designed to prevent the dead port, and do not plug it upside down during installation. If you buy your own SSDs, you may encounter different products with different gold fingers (contacts), which will be divided into B Key, M key or branded M Key, but at present, all the major brands of regular products on sale use M Key (the style in the picture above), so you just need to pay attention to it.
At the end of the article, let's give Hewlett-Packard Star 14 a chance to come forward. After all, such a good-looking product is shown on the back today, and it should be given a chance to show itself. As a notebook that is very suitable for college students and young white-collar workers, Hewlett-Packard Star 14 is light and thin. No matter from the point of view of the fuselage of metal material or the color design of colorful color matching, it has proved its fashion attribute with its strength. The border design with edges and corners, the large screen experience with micro-frame, such a high-performance and cost-effective model, the appearance is as wonderful as "behind"!
This is the end of the introduction about "what is the method of changing memory hard disk for notebook computer". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.