Shulou(Shulou.com)06/03 Report--

WAN connection refers to the way in which a device is connected to WAN, such as home gateway devices. User-oriented interfaces include POTS phone port, broadband LAN port, WIFI wireless interface and so on.

WAN is the abbreviation of wide area network (Wide Area Network). The most common network division is divided according to the scope of the network and the distance between computers, which can be divided into three types: wide area network, local area network and metropolitan area network. The metropolitan area network is limited to the city, while the wide area network extends to the whole world. Generally speaking, WAN can be similar to the concept of Internet net.

The so-called WAN connection refers to the way in which a device is connected to the WAN, such as home gateway devices. User-oriented interfaces include POTS phone port, broadband LAN port, WIFI wireless interface and so on. On the other hand, the external connection mode of home gateway generally has ADSL mode and LAN Ethernet mode. In this case, we say that the home gateway WAN connection is ADSL or Ethernet.

For older routers, the tp Fast Router. To fast FR48 to do experiments, my computer connected to the cat, because we apply for broadband is 200m, mainly for office use, in order to prevent the use of traffic in public areas affect the normal office. I added an old Enterprise routing Quick FR48 in front of the AC manager. The topology diagram is as follows:

As a small network manager, my computer certainly can not be connected to the back of the FR48, my computer wirelessly connected to the AP is often unable to access the router's web management page (after all, cow) I can not power off from time to time. But what if I still have to manage FR48?

When it comes to today's topic. Connect through the WAN port of FR48. Figure 1. My computer and the WAN port of FR48 are under the same light cat.

Setup step

The first step is to restart the router FR48, and my computer is connected to the FR48 through the AP signal.

Enter the management page of the router to access the Internet by choosing a fixed IP (if it is a dynamic IP, that is, each visit, you need to determine the IP obtained by FR48 at that time. It is recommended to set it to fixed first. DNS is provided by the cat. It is OK without setting it.

Look at the security settings on the left, remote web management under the secondary directory

The second step is to look at the picture.

Step three, it's time to witness miracles.

My computer is local

FR48 I just set it to 192.168.10.10

The ip address of the light cat is 192.168.10.1.

The IP address of my computer is 192.168.10.50

I am now using my computer to connect to the FR48. Note that the input address is 192.168.10.10 FR48 8080.

The port number is the same as the one just set.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.