Shulou(Shulou.com)06/01 Report--

This article mainly explains the "Vsphere ESXi installation steps", the article explains the content is simple and clear, easy to learn and understand, the following please follow the editor's ideas slowly in depth, together to study and learn "Vsphere ESXi installation steps" bar!

As the Hypervisor layer of the virtualized environment, ESXi is responsible for virtualizing the server into a resource pool, providing interfaces for management components to call, burning the following iso to CD or bootable USB disk, and installing stand-alone virtualized servers:

I. preparatory work

1. Mirror the file and burn the USB disk

2. Array the server hard disk.

The commonly used arrays are: RAID 0, RAID 1, RAID 5, RAID 10 according to their own actual situation.

Second, virtualize the server

1. Boot and choose to boot from the installation media. Note: the boot mode of each model of the server is different, please find it yourself.

2. Select F11 and continue

Enter the password: rootroot. The password must be at least 8 digits or letters. When logging in to the ESXi server with vsphere client, the account name is root and the password is set above.

3. Other steps are taken by default. Note that when selecting a hard disk, select the corresponding one, and then restart it, as shown in the figure.

4. After restarting, the network card is automatic by default and needs to be modified. Press F2 to enter the following figure.

5. Only the configuration management network is used here. No matter how many network cables are connected to the server, only one management IP is configured. As for the virtual machine traffic running on the server, and the distribution of the management traffic, it should be assigned to the corresponding physical ENI in the vcenter.

6. Configure the IPv4 address according to the actual network situation

7. Enter the DNS configuration interface as shown below.

8. Configure DNS

You can configure it according to the existing environment DNS. At least one Primary DNS must be configured. After the configuration is completed, exit and save. At this point, you need to complete the configuration on the server, and you can operate remotely later.

Just save it!

III. Configuration of the management side

1. After installing VMware vSphere Client, log in with the account password

2. If you install a 60-day trial version of VMware_ESXI6.0, you will be prompted to assign a license key to the host in the terminal interface. Otherwise, it can't be used for 60 days.

3. At this point, we need to distribute the key. Select the "configuration" interface in the terminal, click "licensed functions", then click "Edit" in the upper right corner, select to enter the license key to the new host, click "enter key", enter the key normally, and click OK to complete the preliminary configuration of the terminal.

License: UJ623-A8091-K8L4T-0P38H-8ENQ1

After the completion, you can carry out the relevant operation!

Thank you for your reading, the above is the content of "Vsphere ESXi installation steps", after the study of this article, I believe you have a deeper understanding of the installation steps of Vsphere ESXi, and the specific use needs to be verified in practice. Here is, the editor will push for you more related knowledge points of the article, welcome to follow!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.