Shulou(Shulou.com)06/01 Report--

This article mainly explains "What are the configuration tools of ServerSuperIO". Interested friends may wish to have a look. The method introduced in this paper is simple, fast and practical. Let's let Xiaobian take you to learn "What are the configuration tools of ServerSuperIO"!

14. Introduction to configuration tools, and mounting of device drivers, view drivers, and service instances 14.1 Overview

The development of device driver, view driver and service instance has been introduced. These are developed in the form of components. Next, we involve how to apply them. There are two ways: 1. Develop your own host program based on ServerSuperIO to load device driver, view and service instance. 2. Based on the secondary development kit, use configuration tools to mount applications that are component plug-ins. The following describes the use of configuration tools, as shown below:

14.2 Mount device drivers

There is a DeviceAssemblyList attribute in the configuration tool. This attribute is to configure all currently available program information. After configuring the assembly of each device driver, an AssemblyID attribute with GUID number will be automatically generated as the unique identifier of this assembly and cannot be modified. AssemblyFile is the path of the assembly file. If it is a relative path, it will be in the root directory by default. AssemblyInstance is the instance of the assembly. The rule is the complete namespace + the class name of the device driver. As shown below:

So far, it is not possible to mount and run under the secondary development kit. This step only identifies the device drivers that are currently available. To run under the secondary development suite, you must also create a new service under the ServerInstanceList attribute, and create a new mount device driver under the DeviceInstances attribute. Note that the AssemblyID attribute identifies the device driver instance to be mounted, which is consistent with the above settings. As shown below:

At this point, the device driver is successfully mounted and can be loaded and run normally under the secondary development kit.

14.3 Mount Display View

Mount the display view in the service, similar to the second step of mounting the device driver. As shown below:

14.4 Mount service instance

Mount the Service instance in the service, similar to the second step of mounting the device driver. As shown below:

14.5 Description of service parameters

Each service will have a ServerConfig attribute, which can set the configuration parameters of the service, as shown in the following figure:

For more information on parameters, please refer to: 2. Configuration Parameters of Service Instance

14.6 LinuxCom Property Description

Linux serial port operation, you can set the serial port type corresponding to the serial port number in this attribute, serial port types are divided into: USB and System, the framework will set the serial port and the difference operation according to this, please set according to the actual situation, as shown below:

14.7 Description of other properties

Caption attribute: you can set the software platform name of the secondary development kit; Ver attribute: you can set the version number; Copyright attribute: you can set the company name to identify the copyright of the software platform. This means that the secondary development kit can be applied to the company's specific products and businesses to identify autonomy.

14.8 operation effect

At this point, I believe everyone has a deeper understanding of "ServerSuperIO configuration tools," may wish to actually operate it! Here is the website, more related content can enter the relevant channels for inquiry, pay attention to us, continue to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.