Shulou(Shulou.com)06/03 Report--

Layer 3 Switch-Experiment First, open GNS3 as usual, and configure the route and PC according to the steps we learned before, as shown in the figure:

Now, let's configure the PC and routing environment, connect them with a cable, click the Display Port button, and turn it on. As shown in the figure:

Double-click to open sw1 and start deploying the environment for routing, as shown in the figure below:

After completing the previous step, start configuring the Trunk settings. After each step is completed, check whether the configuration is completed to avoid errors, as shown in the figure:

SW1 has been configured and SW2 can be configured with its environment, IP address and trunk, as shown in the figure below:

After the settings are complete, the next moment is to witness the miracle! First set the IP address for PC123. As shown in the figure:

At this time, the configuration is complete, open PC1 to ping other PCs, if they can be interconnected, then prove that the experiment is successful! As shown in the figure:

The test was successful!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.