Shulou(Shulou.com)06/03 Report--

First of all, I would like to introduce the method of system installation:

1. Manual ghost installation

two。 Hard disk installation (which means placing the system image file / .gho / and ghost.exe on a drive letter other than the system disk)

3. Install the boot disk with a U disk (this method is commonly used now, because when the system cannot be started, it must be installed with the help of the boot disk)

The first method: this is the most popular way to install a system a few years ago.

# install GHSOT software on the computer, in fact, after the flash drive is used as a boot disk, it comes with a miniature Pe system with its own ghost software

A: first put the system image file you downloaded on a drive letter other than the system disk

Then open the GHOST software, the first step:

Second, no, click OK, you will see the ghost interface menu, disk (hard disk backup and restore), parrtion (partition backup and restore)

Check (hard disk detection), we only need partitions for manual installation: so only use parrtion

The submenus below parttion are:

To parttion: it means to copy one partition (the original partition) to another partition (the target partition). Note that the magnetism of the target partition

Disk space must be larger than the disk space of the original partition

To image: it means to back up a partition (which generally represents a system partition) as an image file and put it in another partition.

From image: it means to restore the image file to the primary partition, that is, the system restore (that is, we install the system manually)

B: start using the arrow keys on the keyboard, move to Local parttion from image, and then enter

C: you will find a dialog box that pops up, looking is to find the place where your system image file is put, use the arrow keys to find it, see in

Which drive letter is down? when you find it, select the system image file, winxp.gho,open.

C: click ok (below)

Then click ok (below)

Select disk c as the system drive letter. Generally, the drive letter with primary is the system drive letter of disk c, as shown in the following figure

Click ok

There are three compression methods after ok above. We generally choose fast.

Then yes (click), which starts to install the system.

As shown in the following picture, the system installation is complete, restart the computer

The second method is to install the hard disk.

This premise is that your computer can start up, and if you want to change the system, use the hard disk installation method, that is, ghost.exe/onekey.

And the system image file is placed in a partition other than the system disk:

As shown in the following figure, that is, win.gho and onekey

Open onekey, select disk c, OK, automatic installation

After the installation is complete, as shown in the following figure, just restart

The third, and now the most popular installation method:

First of all, you have to have a 4g/8g U disk. Now the system image file is too large. The image file larger than 4G cannot be copied into the U disk and must be converted.

The format of u disk is ntfs format, which is the same as our computer disk format.

The advantage of using u disk to install the system is that the system bounce down, can't get in, and can't be installed on hard disk, so u disk is used to install the system.

Yes, so will the rest. Don't be afraid any more. The system crashes.

# there are a lot of software to start the system, and I usually use Chinese cabbage

A: first of all, go to the official website of Chinese cabbage to download the new version of Chinese cabbage U disk. The website is www.dabaicaipe.cn.

B: then install it on your computer. After the installation is complete, open the cabbage software and plug in the U disk, as shown in the following picture.

Then click one button to make a startup U disk.

Then click OK

Below, write data to the flash drive

Next, the u-disk is finished: the startup test can be simulated.

If the test is the same as the interface below, it means that the USB flash drive was made successfully.

Next, we have a boot disk, and we need a system image. I'll tell you about a website that you can download.

Www.xitongzhijia.net

After he has finished downloading, there is an iso image package. You can extract it first and put the mirror system files in it.

Win7.gho, (same as win8,win10) copy it to your flash drive.

The next step is to insert your U disk into the computer, enter the motherboard, bios, desktops generally press the de key, and then go in, all the major motherboard manufacturers do not

The same, no longer say, do a good job after the U disk starts

A: you can enter the interface:

Then choose, if you bought the computer in the past two years, choose the computer, otherwise, choose the old computer.

As shown below: the computer enters the miniature pe system, and click on the pe installation tool of Chinese cabbage on the desktop.

Select system disk c and click OK

After that, you will start to install the system automatically. Restart after the installation is complete, and then OK

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.