Shulou(Shulou.com)06/02 Report--

This article will explain in detail the method of setting cad units to millimeters. The editor thinks it is very practical, so I share it for you as a reference. I hope you can get something after reading this article.

The method of setting cad units into millimeters: first open the CAD software and click "format" in the menu item; then find the "units" option in the pop-up drop-down box; finally, set the CAD units in the CAD drawing unit setting window.

To set the CAD unit, above the open CAD, click the menu item pointed to by Arrow 1 in the following figure, and then click Arrow 2 in the pop-up menu.

This opens the CAD drawing unit setting window, you can first determine the precision used here, as needed, click the arrows 1, 2 in the following image to specify the precision.

Then you can click on the arrow in the following picture, in the open unit drop-down box, there are a variety of units to choose from, which unit you need to use, click which one.

If you need to set the CAD units to millimeters, then click millimeters. After the setting is complete, you need to click OK to start the application.

In addition, there is a source content unit under the insertion ratio in CAD. If you need to set this unit, you need to click on the CAD icon, as indicated by arrow 1 below, and then click the option indicated by arrow 2.

On the open window, then click the item indicated by arrow 1 below, and then click under the source content unit so that you can select the source content unit to use.

This is the end of this article on "the method of setting cad units into millimeters". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.