Shulou(Shulou.com)06/02 Report--

This article is about how Frontpage makes web frames. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Framework (Frame) is widely used on the web because it can display multiple networks at the same time.

The links commonly used by users can also be displayed on the surface all the time, reducing the cut rate of the previous one and the next.

The basic operation of the framework

1. First look at the finished product we want to do-- > we can see that the station is divided into three frames-- top, left and right, such as the bottom:

two。 Open the "File" in the upper left corner of frontpage-- > > "Open New File"-> Web, as shown below:

3. The following window will pop up:

Select the frame style (such as location indicated by frame 1)-> select the frame style you want below (such as location indicated by frame 2)-> you can see the preview at the lower right (such as location indicated by position 3)-> then press "OK".

4. After that, the following faces appear, and you can configure the content of each frame network:

To set up a new network means to make a new network yourself, while to set up a starting network is to connect to a network that has already been done.

Set the upper box and the left box-- > start a new web

Right box Settings-- > configure start Network-- >

You can select a network on the or network that has been done in the computer.

In this example, I checked the previously completed personal file (myself.htm), and click on the display of the file, as shown below:

5. After the completion of step 4, there will be the following:

6. You can save the file first at this time-> there will be a window to boot the file at this time.

The first is what kind of file name you want to save to the web on the frame, such as website (you can name yourself, such as top.htm)

Next, what kind of file name do you want to save in the frame file on the left, such as name (you can name it yourself, such as left.htm)

Finally, jump a window-- > what file name do you want to save the entire frame to, such as

(you can choose your own name, such as index.htm. In general, the main frame will be used as the first name. Usually, the first page of a web site will be named index.htm.)

Why didn't you find it? what file name do you want to save the web in the right box?

This is because we initially set the right frame to connect to a myself.htm that has already been done, since it is already done.

Naturally, there is no question of whether there is a file or not.

7. Settings for frame content (unframing lines):

Click on the right button anywhere in the network, and click "frame content", such as the following:

"frame"-- >

Uncheck the "display frame line" and you can cancel the frame line.

8. Finally, according to the example, we insert it at the top of the network, and the left button is used as a list first.

Select list must specify the option information when setting the link (the same as the concept of hyperlink)

Which network or address do you want to go to for this account?

In which frame do you want the specified link content to appear (for example)

Thank you for reading! This is the end of the article on "how to make a web framework in Frontpage". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.