Shulou(Shulou.com)06/02 Report--

This article shares with you a VMware Workstation virtual program installation and virtual machine building.

[there are many screenshots of the steps, but they are very detailed. Please follow the steps patiently while watching.]

:

It is divided into four parts

First, set up the virtualization of the physical machine.

Second, download the network disk file

Third, install the steps of virtual machine software

Fourth, install the win10 virtual machine steps

:

Content one.

Before this installation, we need to determine whether the computer supports virtualization or whether it is enabled. The steps to turn on virtualization are as follows: (only provide BIOS operation on Asustek motherboard. For other motherboards or models, please refer to Baidu)

:

Asustek Z270 motherboard BIOS interface virtualization settings

Step 1: press [F2] immediately after boot to enter the BIOS interface.

Step 2: after entering the interface, find [Adranced Mode (F7)] in the lower right corner, and click to enter.

Step 3: click the [Advanced] option at the top after entering (advanced in English)

Part IV: find the [CPU Settings] click on the first line in the advanced interface and enter it.

Step 5: pull down and find [Intrl Virtualization Technology]

Chinese for "Intel Virtualization" and then click on the right side of the selection [on]

Step 6: press [F10] to save and exit after completion

:

Content two

Installed on the operating system as an application software, multiple operating systems can be installed on this application software is a resident architecture

Virtual machine download link: https://pan.baidu.com/s/1mAvh8l9SKg5P0Swemn1jlQ password: nkob

Download link of win10 system image file: https://pan.baidu.com/s/1_9-hw9BqCh74hoaf4WbsCg password: w3ex (size 3.2g, close to pure version)

:

Content three

This is free. After downloading and clicking install, be careful not to choose to update the software.

Before installation, we create a new folder on a disk other than disk C, and then select the installation steps as follows:

Pay attention to what is indicated in the screenshot during the installation, and the other steps are the final completion of the next step.

Click here for the next step

Be careful not to install disk C here, choose to change it.

Here, select the folder in the drive letter of the folder you built before.

Pay attention to uncheck here, otherwise it will be updated after installation, and once the update is finished, you will need to spend hundreds of yuan to buy the serial number.

The final installation is complete.

Need to restart the computer

If you need to enter the serial number, just copy the input.

:

:

Content 4

Let's start installing the virtual machine for the win10 system

Create a folder to store the win10 system before installation

Here you choose to create a new virtual machine

It is recommended that you choose customization.

Note here that you should choose to install the operating system later.

Choose the win10 x64-bit version here

Be careful not to install it on disk C here. Click browse to select the pre-established folder (win10).

Next step

Note here that the memory size of the virtual machine is 2 gigabytes by default. Considering that multiple virtual machines will be run at the same time, if the memory is too large, most of the 8 gigabytes may not be enough.

Next step

It is recommended that the disk size be 100.

The final installation is complete.

:

Click here.

Click and browse to select the downloaded system image file

Turn on the virtual machine

Next step

Choose to skip

Select Custom

Click New, and select about 30g of space as the system disk.

Next step

You need to wait a long time here.

Choose later.

Quick setup

Choose the red circle next.

Choose to skip this step, and then go to a create user interface, just create a user, do not need to set a password, and then complete to enter the desktop system, and then use

Click the virtual machine to select the installation system activation tool below, and then follow the steps

If you need to choose, choose the file setup.

:

:

:

Finally complete the installation

Finally, note that shutting down the virtual computer is the same as the physical computer in the menu bar, otherwise it will damage the system files.

[hope the above steps will help you]

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.