Shulou(Shulou.com)06/01 Report--

How to use windows 2008 to quickly build a domain environment, for this problem, this article introduces the corresponding analysis and answers in detail, hoping to help more partners who want to solve this problem to find a simpler and easier way.

For the selection of the system here, I use the 08 system, do not evaluate the use of other systems, the use of 08 system must not use the web server version, this version of the system does not support the domain environment, must pay attention.

First of all, when installing, you can choose any version of this. Here I choose the standard version.

Here I will skip the steps in the installation and start directly after the installation is complete.

About the environment of the virtual machine, set up it yourself, or write another article about how to configure the virtual machine later.

First of all, what we need to do is to configure static IP. I am using a custom specific virtual network: 192.168.7.0, so I will fix the IP to 192.168.7.2. This IP can be used as long as there is no conflict, and then set the DNS server address to 127.0.0.1.

After that, install the active Directory, and in the role of server management, click add role

Pay attention to these points, but if you can get to this point, it basically means that all these conditions have been met.

Then select "Active Directory Domain Services" and then take the next step.

After that, you will find another pit that I mentioned in my previous article. Be sure not to follow the online tutorials to install the DNS service in advance. The wizard will guide the installation. If you install it in advance, it may cause the installation of the domain environment to fail.

Then you can install it directly, and the estimated time is 30 seconds.

After that, click the domain service that has just been installed in the role, and run the domain service installation wizard

If you are curious about this, you can use Advanced to install. In normal cases, just click next.

Here, we choose the second item, "create a new domain in a new forest", because at present we only have one domain, if there is a domain, select the forest, and multiple domains become the forest.

Then set the domain name. Here we set it to "veselwuxin.com". Only if it conforms to the normal domain name specification can it be set.

It will be checked later, mainly to prevent conflicts.

After choosing the level of the forest function, I do not understand this very clearly, but the information found on the Internet says that if you choose 08, the domain controller you join must be 08, in order to be compatible with the general 03.

After that, in order to be compatible, continue to choose 03

You will then be prompted to install the DNS service

Since there is no delegation relationship in the domain name, you need to create it here. Select "Yes".

We don't need to change here, just go ahead and take the next step.

After that, the password of the DC administrator will be set. You need to pay attention to the password strength.

You will see the previous configuration information later.

After that, let the wizard configure the domain environment, check "restart after completion", and wait patiently.

After the restart is completed, the system will log in using users in the domain by default.

After the successful login, the information about the local machine will appear, and you can see the information about the domain, which means that the installation has been successful.

After that, let's talk about how to join the machine to the domain. We will encounter another pit mentioned above. When joining the domain environment, the domain-controlled port 139 must be opened. If it is not opened, there will be an error that the network path cannot be found.

Here we use win7 to do this.

First, we need to make sure that this machine can communicate with the domain control.

Then set the DNS server to the IP of DC

After that, ping takes a look at the domain name set above to see if you can communicate with ping properly.

Everything is normal, and then set up the domain environment.

Enter the system first, and then click "change Settings"

Select Network ID

Because we want to join the domain environment, we choose the first one by default

Then choose to use a network with a domain

Then, when it comes to this step, pause and switch to the domain control server to add a user.

Enter the Users column of the domain service

Right-click to create a new user

Just fill in the login name here, and here we take "win7" as an example.

Then set the password, also pay attention to the strength, here I choose never to expire

And then it was successfully created.

Then go back to the win7 machine and use the account password you just added

Then fill in the domain, that is, the domain name you set up earlier.

Then continue to enter the account password and domain just now.

Then click next to enable the domain account

Then give permission, select Users here, otherwise many operations will not be carried out.

Complete, restart will be successful

By default, domain users will be used to log in.

Check it out after logging in.

This is the answer to the question on how to quickly build a domain environment using windows 2008. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel for more related knowledge.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.