Shulou(Shulou.com)06/02 Report--

Install and configure DHCP service under Windows Server2008

DHCP service: assign network parameters to users, such as IP address, etc.

Part I: environmental and preparatory work

One: windows server2008 operating system

Two: a windows ordinary operating system, take WIN7 as an example (for testing)

Three: server IP address: for example, 192.168.80.30

Four: the server and the win7 computer are on the same local area network.

Part two: create DHCP and configure

One: create a DHCP server

1. Service Manager, role, add role, next step

two。 Select DHCP service and click √. Next, (still want to install)

3. Default next step: DNS setting, WINS setting, scope setting is not required.

4. Disable IPv6, next step

As shown in the picture, it has been installed.

Two: configure DHCP

1. Start-Administrative tools-DHCP, open

two。 New scope: right-click IPv4 to create a new scope

Name (for example: test), next step

Address range (for example: 192.168.80.10-192.168.80.200), next

Exclude addresses (as the case may be, excluded addresses will not be assigned, and local addresses will be removed by default), next

Lease term, the default is "8" days after expiration (as the case may be), the next step

Default next step

Enter the gateway (for example: 192.168.80.1), next

Add DNS (for example: 2.2.2.2), next

10. Default next step

11. By default, the next step is completed, as shown in the figure:

twelve。 Check the network parameters of win7 computer, as shown in the figure:

Third: right-click "keep" to bind the MAC address to create a new reservation

Configure retention information

(1) name (for example: boss)

(2) MAC address, enter the specified computer MAC address (command: arp-a)

(3) IP address, enter the IP address you want to give it

After completion, the server will automatically assign the IP address to the MAC address.

Add, complete, as shown in the figure:

View the win7 computer network information, as shown in the figure:

Important commands:

Check the MAC address: arp-a

Release native IP address: ipconfig / release

Re-obtain the native IP address: ipconfig / renew

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.