Shulou(Shulou.com)06/03 Report--

In the production work, it is found that most of the newly produced machine motherboards will replace the interface of usb with usb3.0, while the windows 2008 server R2 system installed as the front machine does not have a usb3.0 driver, resulting in the installation of boot U disk can not normally install the operating system. Now the method of Windows 2008 server R2 integration usb3.0 is shared with you.

One tool / mirror

1. Windows server 2008 X64 With SP2 simplified Chinese version installation image

2. UltraISO floppy disk access software (registration code) is used to make images.

3. Windows usb installation tool software

II. Steps

1. The windows 2008 server R2 system image is made into a system boot disk with UltraISO floppy diskette software.

a. Open the UltraISO floppy disk access software to find a windows 2008 server R2 system image in the system

b. Click boot-write hard disk image-convenient boot-write USB-HDD ±- write

Wait for the write to complete

two。 Write the usb 3.0driver to the mirror

a. Run Windows usb installation tool as an administrator

Right-click to choose to run as an administrator

b. To add a usb3.0 driver, press the check box as shown in the figure, click start, and wait.

The driver of the Windows 2008 server R2 integrated usb3.0 can be completed by following the above procedure.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.