Shulou(Shulou.com)05/31 Report--

In this article Xiaobian introduced in detail for you "Lenovo R720 reinstalled Win10 system can not identify the solid state drive how to solve", detailed content, clear steps, details handled properly, I hope that this "Lenovo R720 reinstalled Win10 system can not recognize how to solve the solid state hard drive" article can help you solve doubts, following the editor's ideas slowly in-depth, together to learn new knowledge.

Cause analysis:

Because Savior R720 defaults to Intel RST Premium mode in the BIOS of the Savior R720 system, which will make the hard disk into a disk array mode (Raid mode), while the original Window 10 installation image does not have a driver in Raid mode by default, so in Intel RST Premium hard disk mode, the solid state disk cannot be found when installing the system.

Note: be sure to back up the important personal data in the flash drive and computer in advance before operation.

Procedure:

Solution one

Download the Intel Raid mode driver on the official website, unzip the driver installation package and place the entire folder in the root directory of the system installation U disk, and then load the driver when the installation system selects the hard drive. (the driver is divided into 32-bit and 64-bit, corresponding to 32-bit and 64-bit systems, respectively)

Select load driver

Pop up the "load driver" page and select "Browse"

Locate the folder where the Raid driver is stored, and the default file name is "f6flpy-x86" or "f6flpy-x64", select the file, and then make sure.

The Raid mode driver is then detected, and when you click next, a read bar appears to start loading the driver. (if prompted to report an error, it is recommended to reload the driver several times, and the path where the driver file is stored had better be an all-English path)

After loading successfully, it will jump back to the interface of the hard drive selected before, at this time, the solid state disk in the machine can be displayed normally, and the system can be installed normally.

Solution 2:

Before installing the system, enter the BIOS interface of the computer (method: immediately after turning on the F2 key or after shutting down, select BIOS Setup through the novo keyhole), select to the Configuration page, and change the Intel RST Premium in the SATA Controller Mode option to AHCI.

After the modification, press F10, select YES to save and exit.

The solid state drive can then be displayed normally and the system can be reinstalled at the interface where you boot into the installation system.

Read here, the article "Lenovo R720 reinstalled Win10 system can not recognize how to solve the solid state disk" article has been introduced, want to master the knowledge of this article still need to practice and use in order to understand, if you want to know more related articles, welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.