Shulou(Shulou.com)06/01 Report--

This article mainly explains "how to configure nat protocol with netsh in xp system". The content in the article is simple and clear, and it is easy to learn and understand. Please follow the editor's train of thought to study and learn "how to configure nat protocol with netsh in xp system".

WindowsXP Chinese version + SP1

Single network card with independent IP within CERNET

Step 0

Confirm that ICS, that is, network connection sharing is turned off

Step 1

Press Win+R to enter and run services.msc, look for Routing and Remote Access in the service, right-click to enter properties, change the startup type to automatic, and click the start button.

Step 2

Open the network neighbor and click "View Network connection" in the network task on the left, you can see the word "incoming", which indicates that the Sep1 operation was successful.

Right-click to open the properties of incoming connections, and in the General tab, check "allow others to pass through interet …" in the virtual private network. The connected user allowed in the "user" tab checks the selected user and determines to exit At this point, the VPN configuration is complete.

Step 3

Press Win+R to enter and run netsh, continue to enter routing and enter, continue to enter ip and enter, continue to enter nat and enter, continue to enter install and enter. Then enter add nterface name= "internal" mode=private and enter, enter add interface "local connection" full and return

The car. Enter show interface and enter, if it appears

NAT internal configuration

-

Mode: dedicated interfac

NAT Local connection configuration

-

Mode: address and port translation

This means that the NAT is configured successfully.

After the above steps are implemented, the VPN+NAT configuration is successful. You can dial into the host and go out through the host agent to access the resources where the host is located. It is like being in a local area network with a host.

Note: if the WinXP Pro language is English, then "internal" and "local connection" should be replaced with relevant characters, and so on in other languages.

Thank you for reading, the above is the content of "how to configure nat protocol with netsh under xp system". After the study of this article, I believe you have a deeper understanding of how to configure nat protocol with netsh under xp system, and the specific use needs to be verified in practice. Here is, the editor will push for you more related knowledge points of the article, welcome to follow!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.