Shulou(Shulou.com)06/02 Report--

This article will explain in detail about the use of linux ip command display and operation routing, the editor thinks it is very practical, so share it with you as a reference, I hope you can get something after reading this article.

Ip command is used to display or manipulate the routes, network devices, policy routes and tunnels of Linux hosts. It is a new and powerful network configuration tool under Linux.

Syntax format: ip [parameters]

Common parameters:

-s outputs more detailed information-f enforces the specified protocol family-4 specifies that the network layer protocol used is the IPv4 protocol-6 specifies that the network layer protocol used is the IPv6 protocol-r when displaying the host, the IP address is not used, but the host's domain name is used

Reference example

Use the ip command to display the operational status of the network device:

[root@linuxcool ~] # ip link list

Use the-s parameter to output more detailed information:

[root@linuxcool ~] # ip-s link list

Display the core routing table:

[root@linuxcool ~] # ip route list [root@linuxcool ~] # ip route show

Display the neighbor routing table:

[root@linuxcool ~] # ip neigh list [root@linuxcool ~] # ip neigh show on the use of linux ip command display and operation routing is shared here. I hope the above content can be of some help and learn more knowledge. If you think the article is good, you can share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.