Shulou(Shulou.com)06/01 Report--

Originally, the host only mode is used to construct the intranet environment, but the virtual machine can not access the external network, but in fact, the host can still connect to this network segment, which can not well simulate the real environment.

Later, someone told me a way to remove the check box hook so that the host could not access this network segment.

However, this method has a disadvantage: when you need to divide multiple subnets into internal networks, you need to create multiple host only virtual network cards and generate multiple virtual network cards in the system. The old version of VMware supports a total of 10 virtual network cards, while the new version of VMware11 supports 20. After deducting VMnet0, VMnet1 and VMnet8, you can only construct 7 or 17 custom networks respectively.

On the other hand, there is no restriction on the use of LAN section, which is very convenient.

1. To configure the LAN section is to assign a name, and there is no need to configure network-related

2. Select the same LAN for machines that want to be on the same private network.

3. Finally, you only need to configure the network card. I have cleared the configuration of the irrelevant network card and keep 5 lines for comparison.

3.1being able to communicate with each other through ping

3.2However, the two virtual machines of ping on the host cannot be connected.

3.3 if you want to connect the intranet machine to the host, you need to go through the gateway, or 2 virtual machines plus a block network card.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.